MAUDE Adverse Event Report: US SURGICAL PUERTO RICO MULTIFIRE ENDO HERNIA; LAPAROSCOPE, GENERAL & PLASTIC SURGERY

Model Number 174025

Device Problems Device Difficult to Setup or Prepare (1487); Detachment of Device or Device Component (2907)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/17/2023

Event Type  malfunction  

Event Description

According to the reporter, intra-operatively of a laparoscopic procedure, when trying to fire the device to anastomose the mesentery.The magazine has loosened and broke off into the patient.The magazine was replaced but the same issue occurred on the second magazine.The disengaged magazines were recovered with normal access.There was no patient injury.

Manufacturer Narrative

Concomitant medical products: 174025, 174025 mf endo hernia 0 4.8 stap x6 (lot#unknown).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: b5, d9, g3, h3, h6 medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, intra-operatively of a laparoscopic procedure, during fobi ring removal, there was the incidental finding of the mesentericum.When trying to fire the device to anastomose the mesentery, the magazine loosened and broke off into the patient.The magazine was replaced but the same issue occurred on the second magazine.The disengaged magazines were recovered with normal access.There was no patient injury.

Manufacturer Narrative

Evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted the center bar of the instrument had retracted into the retainer.It was reported that a component disengaged from the device into the surgical cavity, and upon loading, the reload was not seated properly and/or wobbled with movement of the device.The reported issues were confirmed.The product analysis noted evidence that the device was not used as intended.This issue may occur when the firing handle is not completely cycled and trying to remove the dlu incorrectly during the incomplete firing cycle.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: MULTIFIRE ENDO HERNIA
• Type of Device: LAPAROSCOPE, GENERAL & PLASTIC SURGERY
• Manufacturer (Section D): US SURGICAL PUERTO RICO; 201 sabanetas industrial park; ponce PR 00716 4401
• Manufacturer (Section G): US SURGICAL PUERTO RICO; 201 sabanetas industrial park; ponce PR 00716 4401
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 16491787
• MDR Text Key: 310872506
• Report Number: 2647580-2023-00887
• Device Sequence Number: 1
• Product Code: GCJ
• UDI-Device Identifier: 10884521070592
• UDI-Public: 10884521070592
• Combination Product (y/n): N
• Reporter Country Code: SZ
• PMA/PMN Number: K912097
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 05/12/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/06/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 174025
• Device Catalogue Number: 174025
• Device Lot Number: P2F0477
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 04/27/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 06/16/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: SEE H10