• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BARD PERIPHERAL VASCULAR, INC. ULTRAVERSE 035 PTA CATHETER; PTA BALLOON DILATATION CATHETER

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BARD PERIPHERAL VASCULAR, INC. ULTRAVERSE 035 PTA CATHETER; PTA BALLOON DILATATION CATHETER Back to Search Results
Catalog Number U357556
Device Problems Break (1069); Hole In Material (1293)
Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)
Event Date 11/13/2015
Event Type  malfunction  
Manufacturer Narrative
The lot number for the device has been provided.A review of the device history records is currently being performed.The device has been returned to the manufacturer for evaluation.The investigation is currently underway.The information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
 
Event Description
It was reported that a hole was allegedly identified on the pta balloon dilatation catheter.It was further reported that the device was retracted without issue and another balloon was used to complete the procedure.There was no reported patient injury.
 
Manufacturer Narrative
Manufacturing review: the lot number was provided and the lot device history records were reviewed.The lot met all release criteria.There was nothing found to indicate there was a manufacturing related cause for this event.This is the only complaint reported for this lot number and issue to date.Visual/microscopic inspection: the sample was returned.No anomalies were noted to the strain relief or the y-hub.Functional/performance evaluation: the patency of the lumen was tested with an 0.035¿ guidewire and it passed without issue.The inflation hub was connected to an inflation device and the balloon was inflated with water.Upon inflation, water was observed leaking out of the distal end of the strain relief.The strain relief was removed and a partial circumferential catheter shaft break was found 0.5cm from the hub.Sanding marks were noted on the catheter at the location of the break.Medical records review: medical records were not provided for review.Image/photo review: images/photos were not provided for review.Conclusion: the investigation is confirmed for a partial circumferential catheter shaft break just distal to the y-hub, which the user likely perceived as a hole in the catheter.Excessive sanding of the catheter under the strain relief is the root cause for the partial circumferential catheter break.Labeling review: the current ifu (instructions for use) states: precautions: carefully inspect the catheter prior to use to verify that the catheter has not been damaged during shipment and that its size, shape, and condition are suitable for the procedure for which it is to be used.Do not use if product damage is evident.Dilatation catheter preparation: prepare the wire lumen of the catheter by attaching a syringe to the wire lumen hub and flushing with sterile saline solution.Use of the ultraverse 035 pta dilatation catheter: position the balloon relative to the lesion to be dilated, ensure the guidewire is in place, and inflate the balloon to the appropriate pressure.The information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ULTRAVERSE 035 PTA CATHETER
Type of Device
PTA BALLOON DILATATION CATHETER
Manufacturer (Section D)
BARD PERIPHERAL VASCULAR, INC.
1625 west 3rd st.
tempe AZ 85281
Manufacturer (Section G)
CLEARSTREAM TECHNOLOGIES LTD.
moyne upper
enniscorthy, co. wexford
EI  
Manufacturer Contact
judith ludwig
1625 west 3rd st.
tempe, AZ 85281
4803032689
MDR Report Key5277603
MDR Text Key33710544
Report Number2020394-2015-01981
Device Sequence Number1
Product Code LIT
Combination Product (y/n)N
Reporter Country CodeBE
PMA/PMN Number
K142261
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Reporter Occupation Physician
Type of Report Initial,Followup
Report Date 11/16/2015
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/09/2015
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date08/31/2016
Device Catalogue NumberU357556
Device Lot Number50114321
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer12/02/2015
Is the Reporter a Health Professional? Yes
Date Manufacturer Received03/08/2016
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured10/06/2014
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-