• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ANGIODYNAMICS ANGIODYNAMICS STOPCOCK, MID-PRESSURE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ANGIODYNAMICS ANGIODYNAMICS STOPCOCK, MID-PRESSURE Back to Search Results
Catalog Number H965700350091
Device Problem Tear, Rip or Hole in Device Packaging (2385)
Patient Problem Not Applicable (3189)
Event Date 06/15/2016
Event Type  malfunction  
Manufacturer Narrative
A review of the device history records was performed for the reported packaging lot for any deviations related to the reported defect of the complaint. The review confirms that the lot met all material, assembly and performance specifications. The angiodynamics april 2016 complaint report was reviewed for the stopcocks product family and the failure mode,"hole in pouch. " no adverse trends were identified. The returned sample was visually inspected and the hole in the pouch was confirmed. There was a (b)(4) label on the pouch with the hole. The root cause of the hole is the handle from the stopcock presses outward against the tyvek. As part of the receiving process at (b)(4), all pouched products are removed from their inner boxes and a (b)(4)label (in (b)(4)) is applied to each pouch. Additional handling may occur if product is 100% visually inspected. The pouched product is then re-boxed into the inner box by the (b)(4)warehouse employees. The hole in the tyvek was likely caused by the handle of a stopcock in the pouch, however, what caused the handle to be pushed against the tyvek in a manner that resulted in a hole cannot be determined. Potential contributing factors include: handling of the pouches as they are placed in the inner boxes. Handling during transit to (b)(4) warehouse. Handling during (b)(4) labeling/inspection and re-boxing process. All pouches are 100% inspected per angiodynamics procedures during the sealing and final box processes. The directions for use (dfu) packaged with the kits contain the following warning: "contents supplied sterile using an ethylene oxide (eo) process. Do not use if sterile barrier is damaged. " ((b)(4)).
 
Event Description
As reported by angiodynamic's distributor in (b)(4), in the distributor's warehouse a small hole was found in the tyvek portion of a stopcock pouch, breaching the sterility. The device had not been provided to a hospital, and was returned to angiodynamics for evaluation.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand NameANGIODYNAMICS
Type of DeviceSTOPCOCK, MID-PRESSURE
Manufacturer (Section D)
ANGIODYNAMICS
10 glens falls technical park
glens falls NY 12801
Manufacturer (Section G)
ANGIODYNAMICS
10 glens falls technical park
glens falls NY 12801
Manufacturer Contact
law ryan
10 glens falls technical park
glens falls, NY 12801
5187424488
MDR Report Key5761377
MDR Text Key48525665
Report Number1317056-2016-00102
Device Sequence Number1
Product Code DTZ
UDI-Device IdentifierH965700350091
UDI-PublicH965700350091
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
K782095
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type distributor,foreign
Reporter Occupation
Type of Report Initial
Report Date 06/16/2016
1 Device was Involved in the Event
0 Patients were Involved in the Event:
Date FDA Received06/30/2016
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Other
Device Expiration Date03/31/2019
Device Catalogue NumberH965700350091
Device Lot Number5004975
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer06/22/2016
Is the Reporter a Health Professional? No
Was the Report Sent to FDA?
Event Location No Information
Date Manufacturer Received06/16/2016
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured03/21/2016
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial

-
-