• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BOSTON SCIENTIFIC - GALWAY PROMUS PREMIER¿; STENT, CORONARY, DRUG-ELUTING

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BOSTON SCIENTIFIC - GALWAY PROMUS PREMIER¿; STENT, CORONARY, DRUG-ELUTING Back to Search Results
Model Number H7493952824270
Device Problem Break (1069)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 11/13/2016
Event Type  malfunction  
Manufacturer Narrative
Device is a combination product.(b)(4).
 
Event Description
It was reported that shaft break occurred.The target lesion was located in a coronary vessel.A 2.75x24mm promus premier¿ stent was advanced to treat the lesion.However, the shaft broke upon delivery.The procedure was completed with another with same device.No patient complications were reported and the patient's status was fine.
 
Manufacturer Narrative
Device evaluated by mfr: promus premier, us, mr, 2.75 x 24mm stent delivery system (sds) was returned.A visual examination of the crimped stent found no issues with the crimped stent.There were no signs of damage; stretching or lifting of the stent struts.The stent showed no signs of movement and was set equidistant between the proximal and distal markerbands.The stent od (outer diameter) of the stent was measured and was within the maximum crimped stent specification indicating that there were no issues with the crimp stent profile.A visual and tactile examination found a hypotube break 263mm from the distal tip and multiple hypotube kinks along the full catheter length.A visual and tactile examination found multiple inner/outer kinks along the extrusion.This type of damage may have been caused by excessive forces exerted during withdrawal of the device.The bi-component bond showed no signs of damage or strain.A visual and tactile examination found no damage to the tip.No other issues were identified during the product analysis.The manufacturing batch record review confirmed that the device met all material, assembly and performance specifications.The most probable root cause is operational context as device performance was limited due to anatomical procedural factors.(b)(4).
 
Event Description
It was reported that shaft break occurred.The target lesion was located in a coronary vessel.A 2.75x24mm promus premier stent was advanced to treat the lesion.However, the shaft broke upon delivery.The procedure was completed with another with same device.No patient complications were reported and the patient's status was fine.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
PROMUS PREMIER¿
Type of Device
STENT, CORONARY, DRUG-ELUTING
Manufacturer (Section D)
BOSTON SCIENTIFIC - GALWAY
Manufacturer (Section G)
BOSTON SCIENTIFIC - GALWAY
Manufacturer Contact
sonali arangil
one scimed place
maple grove, MN 55311
7634941700
MDR Report Key6189328
MDR Text Key62854296
Report Number2134265-2016-11675
Device Sequence Number1
Product Code NIQ
UDI-Device Identifier08714729844846
UDI-Public(01)08714729844846(17)20170501(10)18608934
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
P110010
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Physician
Type of Report Initial,Followup
Report Date 11/29/2016
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/20/2016
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date05/01/2017
Device Model NumberH7493952824270
Device Catalogue Number39528-2427
Device Lot Number18608934
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer12/01/2016
Is the Reporter a Health Professional? Yes
Date Manufacturer Received01/10/2017
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured11/20/2015
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-