The event product was returned to applied medical for evaluation.Upon inspection, engineering was unable to confirm the customer's complaint.The device met current specifications.The root cause of the event is likely the residue found inside the device or the angle of the laparoscope relative to the obtuator.Applied medical will continue to monitor its vigilance system for trends and take appropriate actions, as necessary, to ensure the performance and safety of its products.This report is being filed as a result of a re-review of applied medical complaints received between june 1, 2014 and may 31, 2016.This retrospective review was associated with a quality management system (qms) compliance action plan developed and presented to fda to address an april 10, 2015 warning letter.Applied medical has revised its mdr reporting criteria to be more conservative and has improved complaint handling and mdr reporting processes.The reviews ensured that recent reportable events were appropriately identified and reported to the designated regulatory authority(ies).This report, which represents the initial and final reports combined, is being submitted based on the findings of that retrospective review.In accordance with 21 cfr 803.56, if additional information is obtained which was not known or was not available when this report was submitted, then a supplemental report will be submitted to the fda.
|
Laparoscopic hysterectomy- "after inserting the 5x100mm trocar under direct visualization with a 5mm, 0 degree stryker laparoscope, the scope became stuck in the obturator and could not easily be removed, as it normally is.The surgeon had to forcefully remove the laparoscope from the obturator.The surgeon visually inspected and found no abnormality with the laparoscope." patient status: is unknown at this time.
|