• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: OLYMPUS MEDICAL SYSTEMS CORP. SINGLE USE ELECTROSURGICAL HEMOSTATIC FORCEPS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

OLYMPUS MEDICAL SYSTEMS CORP. SINGLE USE ELECTROSURGICAL HEMOSTATIC FORCEPS Back to Search Results
Model Number FD-410LR
Device Problems Adverse Event Without Identified Device or Use Problem (2993); Device Handling Problem (3265)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 03/06/2017
Event Type  malfunction  
Manufacturer Narrative
The subject device has not been returned to olympus medical systems corp.(omsc) for evaluation.The exact cause could not be conclusively determined.A supplemental report will be submitted, if additional and significant information becomes available at a later time.
 
Event Description
During an unspecified procedure, the subject device was not activated.The intended procedure was completed with another device.No patient injury was reported.
 
Manufacturer Narrative
This is a supplemental report for mfr report # 8010047-2017-00386 to provide additional information.The subject device was returned to olympus medical systems corp.(omsc) for evaluation.There were no defects on the subject device.The exact cause could not be conclusively determined.However, based on the similar cases in the past, it was known that failure of energization might occur because the current density decreased due to increasing of contact area between the tissue and the subject device.Also, the contact area between the tissue and the subject device might increase since the target tissue was soaked in water, the non-grasping section was come in contact with the tissue or the grasped tissue was too much.The instruction manual of the device has already warned as follows; *pulling the tissue when applying the current.This could cause patient injury such as perforations and/or bleeding.When necessary, provide treatments to prevent perforations or bleeding from occurring after the procedure.Ensure that postoperative follow-ups are performed, and confirm that no abnormalities are found in the patient.
 
Manufacturer Narrative
This supplemental report is submitting to correct "device product code".
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
SINGLE USE ELECTROSURGICAL HEMOSTATIC FORCEPS
Type of Device
SINGLE USE ELECTROSURGICAL HEMOSTATIC FORCEPS
Manufacturer (Section D)
OLYMPUS MEDICAL SYSTEMS CORP.
2951 ishikawa-cho
hachioji-shi, tokyo-to
Manufacturer Contact
hiroki moriyama
2951 ishikawa-cho
hachioji-shi, tokyo-to 
8142642517
MDR Report Key6448969
MDR Text Key71589032
Report Number8010047-2017-00386
Device Sequence Number1
Product Code KNS
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
PK062517
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type user facility
Reporter Occupation Other
Type of Report Initial,Followup,Followup
Report Date 03/13/2019
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received03/31/2017
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator No Information
Device Model NumberFD-410LR
Device Lot NumberK6X280
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer03/15/2017
Is the Reporter a Health Professional? No
Was the Report Sent to FDA? No
Date Manufacturer Received02/20/2019
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured10/28/2016
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-