MAUDE Adverse Event Report: STRYKER GMBH SELF-DRILLING HALF PIN APEX Ø 3MM, 110 X 25MM; PIN, FIXATION, THREADED

Model Number 5038-2-110

Device Problems Break (1069); Detachment Of Device Component (1104)

Patient Problem No Known Impact Or Consequence To Patient (2692)

Event Date 08/21/2017

Event Type  malfunction  

Manufacturer Narrative

The reported event that a self-drilling half pin apex ø 3 mm, 110 x 25 mm broke during surgery could not be confirmed, since the device was not returned for evaluation and no other evidences were provided.Based on investigation, the root cause was attributed to be user related.The surgeon used the self-drilling half pin apex ø 3 mm, 110 x 25 mm in a navigation procedure.This is off-label use.Indeed, the operative technique of this system states clearly that ¿apex pins are not intended for navigation procedure purposes¿.A review of the device history for the reported lot did not indicate any abnormalities.No corrective actions are required at this time.A review of the labeling did not indicate any abnormalities.No indications of material, manufacturing or design related problems were found during the investigation.If the device is returned or if any additional information is provided, the investigation will be reassessed.Labeling extracts.The operative technique (apex-st-1 en apex pins op tech) was reviewed: ''pin insertion guidelines [.] caution: apex pins are not intended for navigation procedure purposes.'' [original statement(s)] the instruction for use (v15013 rev n non active implant ifu ot-ifu-105 rev 3) was reviewed: ''ensure that you are familiar with the intended uses, indications/contraindications, compatibility and correct handling of the implant, which are described in the operative technique manual for the product system.[.] for your information, avail yourself of the training courses and publications offered (e.G.Operative techniques).'' [original statement(s)].

Event Description

It was reported that during a navigated primary tka on patient's right knee, 2 apex pins broke off at time of insertion.The surgeon took x-rays and determined that it would cause the patient more harm to remove the broken pieces than leaving them in would be.Rep reported that there was no surgical delay and that the procedure was completed successfully.Rep also reported that no further medical reports, patient data, or x-rays are available due to surgeon policy.

• Brand Name: SELF-DRILLING HALF PIN APEX Ø 3MM, 110 X 25MM
• Type of Device: PIN, FIXATION, THREADED
• Manufacturer (Section D): STRYKER GMBH; bohnackerweg 1; postfach; selzach 2545 ; CH 2545
• Manufacturer (Section G): STRYKER GMBH; bohnackerweg 1; postfach; selzach 2545 ; CH 2545
• Manufacturer Contact: anna jusinski ; 325 corporate drive; mahwah, NJ 07430 ; 2018315000
• MDR Report Key: 6874124
• MDR Text Key: 86781334
• Report Number: 0008031020-2017-00525
• Device Sequence Number: 1
• Product Code: JDW
• UDI-Device Identifier: 07613327091748
• UDI-Public: (01)07613327091748(10)V51022
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K861766
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: health professional
• Reporter Occupation: Physician
• Type of Report: Initial
• Report Date: 09/18/2017

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/18/2017
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 5038-2-110
• Device Catalogue Number: 50382110
• Device Lot Number: V51022
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 08/21/2017
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 01/19/2017
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Other
• Patient Age: 47 YR