Model Number F118101 |
Device Problems
Retraction Problem (1536); Failure to Advance (2524); Physical Resistance (2578)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Type
malfunction
|
Manufacturer Narrative
|
The device has not been returned to the manufacturer, at this time, for evaluation.A lot history review (lhr) review is not possible; the manufacturing lot number that was provided is incorrect.Device not returned yet.
|
|
Event Description
|
Per sales rep, the facility reported the rn first attempted insertion in the left basilic vein and was not successful.The second attempt was in the left brachial vein, and the rn was able to cannulate, (able to visualize needle in usg).The rn attempted to advance the guidewire followed by the catheter, but met resistance to thread it in.It was stated that the rn tried to retract the entire unit, however was unsuccessful.A warm compress and tourniquet was applied and they waited for 5 minutes then removal was re-attempted.The rn was then able to pull the whole unit out without resistance.The doctor was at the bedside and the rn explained the situation, the doctor suggested an x-ray of the left arm.
|
|
Manufacturer Narrative
|
The following were reviewed as part of this investigation: patient severity, frequency analysis, applicable previous investigation(s), sample (if available), applicable fmea documents, labeling, and applicable manufacture records.Based on a review of this information, the following was concluded: the complaint of difficult insertion and removal is inconclusive, due to poor sample condition.One photograph of a powerglide pro was returned for evaluation.An initial visual observation of the photograph showed use residue on the device.The catheter and catheter deployment wings could not be seen in the photograph.The purple guidewire slide appeared to be advanced fully forward.Based on the description of the reported event and an evaluation of the returned photograph, possible contributing factors of difficult insertion and removal include guidewire inserted into tissue, damaged guidewire, damaged catheter, and insertion technique.As a note, the product ifu cautions: ¿always keep the housing stationary while advancing catheter wings.Failure to do so may prevent catheter from entering vein and cause delays in procedure.¿ a lot history review (lhr) of rebu2241 showed no other similar product complaint(s) from this lot number.
|
|
Event Description
|
Per sales rep, the facility reported the rn first attempted insertion in the left basilic vein and was not successful.The second attempt was in the left brachial vein, and the rn was able to cannulate, (able to visualize needle in usg).The rn attempted to advance the guidewire followed by the catheter, but met resistance to thread it in.It was stated that the rn tried to retract the entire unit, however was unsuccessful.A warm compress and tourniquet was applied and they waited for 5 minutes then removal was re-attempted.The rn was then able to pull the whole unit out without resistance.The doctor was at the bedside and the rn explained the situation, the doctor suggested an x-ray of the left arm.
|
|
Search Alerts/Recalls
|
|