• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MEDINOL LTD. ELUNIR¿ RIDAFOROLIMUS ELUTING CORONARY STENT SYSTEM; CORONARY DRUG-ELUTING STENT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MEDINOL LTD. ELUNIR¿ RIDAFOROLIMUS ELUTING CORONARY STENT SYSTEM; CORONARY DRUG-ELUTING STENT Back to Search Results
Model Number 3.0X28
Device Problems Difficult to Remove (1528); Physical Resistance/Sticking (4012)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 03/27/2018
Event Type  malfunction  
Manufacturer Narrative
Device not returned to manufacturer.The distributor report indicated 2 devices under the event.At this point it cannot be determine which device malfunctioned.2 separate reports will be issued.
 
Event Description
Description as reported: "sticky ballon".Ballon would not re i've easily after deployment, even after ballon was deflated.No patient injury.Device will not be returned for evaluation.
 
Event Description
Additional information: final report dated june 19, 2018 - conclusions: the review of the dhr's (device history record) indicates that the products were supplied meeting specifications.There is no evidence to suggest that there were any manufacturing issues that contributed to the reported events.The investigation was limited as we did not receive the used products.It is not possible to reach a definite conclusion as to how and why this event happened with the information that we received.There was no injury to patient.The stents deployed in the patient.The current status of the patient is stable.
 
Event Description
Event description was updated on may 02, 2018: as reported the elunir 3.0x28 and elunir 3.0x17 us balloons would not remove easily after deployment, even after the balloons were deflated.There was no patient injury reported and products will not be returned for analysis.Additional information received on may 03, 2018: after several attempts the balloon catheter was then removed.Took a couple of tugs for it to be removed.About 30 seconds.The balloon catheters were not removed easily, they were stuck at lesion site after deployment and were removed by continuous wiggling and tugging.The products were stored and handled according to the instructions for use (ifu); no damage was noted to the packaging of the devices; the devices were stored the whole time in the cath lab in a cart; there was no difficulty removing the products from the hoop; there was no difficulty removing the protective balloon covers; there was no difficulty removing the stylet or any of the sterile packaging components; no kinks or other damages were noted prior to inserting the products into the patient; the devices were preped normally (i.E.Maintain negative pressure); the used contrast media was omnipaque; the contrast to saline ratio: 50/50; the same indeflator was used successfully with other devices; there was no resistance/friction while inserting the balloons through the guide catheter.Vessel / lesion characteristics : severe calcified lesion and vessel; there was no difficulty advancing the balloon catheters through the vessel; there was no difficulty crossing the lesion; the balloons deflated normally; the balloon catheters were not kinked while being used; the products were removed intact (in one piece) from the patient; no patient injury occur.The current status of the patient is stable.Additional information received on may 06, 2018: the physician did not try to re-inflate the balloon as instructed in the ifu.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ELUNIR¿ RIDAFOROLIMUS ELUTING CORONARY STENT SYSTEM
Type of Device
CORONARY DRUG-ELUTING STENT
Manufacturer (Section D)
MEDINOL LTD.
beck tech bldg
8 hartom st.
jerusalem, 97775 08
IS  9777508
MDR Report Key7471371
MDR Text Key107351630
Report Number3003084171-2018-00012
Device Sequence Number1
Product Code NIQ
UDI-Device Identifier07290107013994
UDI-Public07290107013994
Combination Product (y/n)N
PMA/PMN Number
P170008
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type distributor
Type of Report Initial,Followup,Followup
Report Date 04/04/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received04/29/2018
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Physician
Device Expiration Date10/31/2019
Device Model Number3.0X28
Device Catalogue NumberLUN300R28US
Device Lot NumberLNRUS00046
Was Device Available for Evaluation? No
Was the Report Sent to FDA? No
Date Manufacturer Received05/02/2018
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
-
-