BARD ACCESS SYSTEMS POWERLOC SAFETY INFUSION SET 20G X 0.75IN WITH Y-SITE; PORT & CATHETER, IMPLANTED, SUBCUTANEOUS, INTRAVASCULAR
|
Back to Search Results |
|
Catalog Number 0672034J |
Device Problem
Detachment Of Device Component (1104)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 04/07/2018 |
Event Type
malfunction
|
Manufacturer Narrative
|
The information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.The device has not been returned to the manufacturer, at this time, for evaluation.A lot history review (lhr) review is not possible, as no manufacturing lot number has been provided by the complainant.
|
|
Event Description
|
It was reported that "the tube was detached from the wing part".No additional information provided.No patient harm reported.
|
|
Manufacturer Narrative
|
The following were reviewed as part of this investigation: patient severity, frequency analysis, applicable previous investigation(s), sample (if available), applicable fmea documents, labeling, and applicable manufacture records.Based on a review of this information, the following was concluded: the complaint of a detached tube is confirmed but the exact cause is unknown.One 20 ga x 0.75 in powerloc safety infusion set was returned for investigation.Adhesive residue was observed on the tubing.The needle was bent approximately 30 degrees.Tactile evaluation of the sample resulted in the luer hub detaching from the tubing with a small amount of force.It is likely that the adhesive bond between the tubing and the luer hub was broken prior to sample receipt at vad.Microscopic observation with uv lighting revealed an adhesive fillet at the luer hub.Based on the condition of the returned sample, possible contributing factors include excessive tensile force during use.As the hub was observed to be detached and no manufacturing deficiencies were observed, the complaint is confirmed, cause unknown.A lot history review (lhr) review is not possible, as no manufacturing lot number has been provided by the complainant.
|
|
Event Description
|
It was reported that "the tube was detached from the wing part." no additional information provided.No patient harm reported.
|
|
Search Alerts/Recalls
|
|
|