• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MEDOS INTERNATIONAL SàRL CH 5.5 TI CORT FIX 6X40MM; ORTHOSIS, SPINAL PEDICLE FIXATION, FOR DEGENERATIVE DISC DISEASE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MEDOS INTERNATIONAL SàRL CH 5.5 TI CORT FIX 6X40MM; ORTHOSIS, SPINAL PEDICLE FIXATION, FOR DEGENERATIVE DISC DISEASE Back to Search Results
Model Number 186731640
Device Problem Break (1069)
Patient Problem Spinal Column Injury (2081)
Event Type  Injury  
Manufacturer Narrative
(b)(4).A complaint investigation will be performed.The complaint product is not available for the investigation.A supplemental report is not anticipated unless the results of the complaint investigation identify a corrective action or additional relevant information.Should the product become available, a physical evaluation will be conducted and a supplemental report filed with the results.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
 
Event Description
On (b)(6) 2015, the plif surgery for spinal canal stenosis was performed by using the expedium spine system.The fixed site was l5 at which screwing was done by the cortical bone trajectory (cbt) technique.After the surgery, on (b)(6) 2018, the re-operation was performed because it was found that two screws distally located had been broken out of six screws (186731640).The re-operation was performed to extract all the six screws and implant new screws by the traditional pedicle screw (ps) technique.During the re-operation, five screws were successfully extracted, but one of the two broken screws could not be extracted because it had been broken at a deep site.The re-operation was completed with the one broken screw left in the patient¿s bone there was no adverse consequence to the patient.The surgeon commented that the head angle might have not reached the required angulation.
 
Manufacturer Narrative
Product complaint # (b)(4).Visual examination at the macroscopic level revealed that the fracture was located along the screw shank.The fracture analysis reveals the optical image of the fracture shank surface reveals two surface morphologies, a rough/ grainy region with progression lines and a smooth region; which is indicative of fatigue failure.A review of the device history record was conducted.No issues were identified during the manufacturing and release of this product that could have contributed to the problem reported by the customer.All complaint trends will be evaluated as a part of the depuy spine monthly complaint review meeting.A definitive root cause for the ployaxial screws fracturing could not be positively determined.However, the optical image of the fracture shank surface reveals two surface morphologies, a rough/ grainy region with progression lines and a smooth region; which is indicative of fatigue failure.As there has been no issue identified in the manufacturing or release of the device that could have contributed to the problem reported by the customer and no systemic trends were found, this complaint file will be closed with no further action required.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
5.5 TI CORT FIX 6X40MM
Type of Device
ORTHOSIS, SPINAL PEDICLE FIXATION, FOR DEGENERATIVE DISC DISEASE
Manufacturer (Section D)
MEDOS INTERNATIONAL SàRL CH
chemin-blanc 38
le locle 02400
SZ  02400
Manufacturer (Section G)
MEDOS INT SPINE
chemin blanc 38
le locle
SZ  
Manufacturer Contact
jason busch
325 paramount drive
raynham, MA 02767
5088808100
MDR Report Key7761712
MDR Text Key116387481
Report Number1526439-2018-50753
Device Sequence Number1
Product Code NKB
UDI-Device Identifier10705034351827
UDI-Public(01)10705034351827
Combination Product (y/n)N
PMA/PMN Number
K110216
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type foreign,user facility
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 07/13/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received08/08/2018
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number186731640
Device Catalogue Number186731640
Device Lot NumberATCDGZ
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer08/14/2018
Is the Reporter a Health Professional? No
Date Manufacturer Received08/29/2018
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured02/24/2015
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? Yes
Type of Device Usage Unknown
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age63 YR
-
-