MAUDE Adverse Event Report: SMITH & NEPHEW, INC. MOTOR DRIVE UNIT, HAND CNTRL, PWRMX EL; SAW, POWERED, AND ACCESSORIES

Catalog Number 72200616

Device Problem Overheating of Device (1437)

Patient Problem No Consequences Or Impact To Patient (2199)

Event Date 10/03/2018

Event Type  malfunction  

Event Description

It was reported that the motor was hot.A backup device was available to complete the procedure with no delay and no patient injuries.

Manufacturer Narrative

The reported device was not returned to the designated complaint unit for independent evaluation, thus visual inspection and functional testing could not be performed.A relationship, if any, between the subject device and the reported event could not be determined.A review of the device history record shows there are no indications to suggest that the product did not meet manufacturing specification or would not be able to perform as intended.If the product associated with this event is returned at a future date, this evaluation will be reopened for investigation.

Manufacturer Narrative

The device was received for evaluation.A visual inspection was performed on the product and a pitted housing was observed.There was a relationship found between the returned device and the reported incident.Product failed functional testing with blade stall error and overheating.Cause of overheating and errors is a corroded motor/gearbox.The motor/gearbox assembly could not be removed from the housing for further assessment due to corrosion.The complaint was confirmed and the root cause has been determined to be corrosion of the motor and gearbox assembly.A blade stall condition will result in increased current draw from the control unit which will heat the motor and handpiece housing.Factors which can contribute to gearbox corrosion include cleaning and sterilization methods and the chemicals involved.A review of the device history records showed there were no indications to suggest that the product did not meet manufacturing specification or would not be able to perform as intended.

Event Description

It was reported that during procedure the motor was hot.A backup device was available to complete the procedure with no delay and no patient injuries.

• Brand Name: MOTOR DRIVE UNIT, HAND CNTRL, PWRMX EL
• Type of Device: SAW, POWERED, AND ACCESSORIES
• Manufacturer (Section D): SMITH & NEPHEW, INC.; smith & nephew, inc.; oklahoma city OK 73107 6512
• Manufacturer (Section G): SMITH & NEPHEW, INC.; 76 s. meridian ave.; oklahoma city OK 73107 6512
• Manufacturer Contact: jim gonzales ; 7000 west william cannon drive; austin, TX 78735 ; 5123585706
• MDR Report Key: 7956839
• MDR Text Key: 123497402
• Report Number: 1643264-2018-00773
• Device Sequence Number: 1
• Product Code: HAB
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 03/11/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/11/2018
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 72200616
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 01/15/2019
• Date Manufacturer Received: 03/08/2019
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1