MAUDE Adverse Event Report: TERUMO CARDIOVASCULAR SYSTEMS CORPORATION SHUNT SENSOR SYS500; BLOOD GAS MONITOR

Model Number CDI510H

Device Problem Leak/Splash (1354)

Patient Problem No Patient Involvement (2645)

Event Date 10/30/2018

Event Type  malfunction  

Manufacturer Narrative

Terumo has not received the device for evaluation; therefore, the investigation has yet to be completed.Terumo plans on submitting a follow-up report when the investigation is complete and when more information becomes available.(b)(4).

Event Description

The user facility reported to terumo cardiovascular that prior to cardiopulmonary bypass, during prime, a leakage was observed after the shunt sensor was attached to the bpm probe in the artery side of the bpm.No patient involvement as this occurred during prime.Product was changed out.Procedure was completed successfully.

Manufacturer Narrative

This follow-up report is submitted to fda in accord with applicable regulations ¿ and as indicated by terumo cardiovascular systems in the initial report submitted to the fda on november 19, 2018.  (b)(4).All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.

Manufacturer Narrative

This follow-up report is submitted to fda in accord with applicable regulations.(b)(4).The returned sample was visually inspected, without the sparger assembly and white cap.It was leak tested (as received) by connecting with the calibrated manometer, submerged into a water bath, pressurized up to 1030 mmhg.A leak was noted at approximately 9 mmhg.The large bore adapter blue cap was then loosened and re-tightened by hand.It was leak tested for the second time by connecting with the calibrated manometer, submerged into a water bath, and pressurized up to 1030 mmhg, and no leaks were noted.A retention sample from the same lot number was visually inspected and confirmed to have no traces of buffer on the outside of the unit or inside of the pouch.It was also leak tested and pressurized up to 1030 mmhg.No leaks were noted.The root cause for this event was determined to be the large blue vent cap for shunt sensor was not fully tightened either during setup of the circuit, or after the gas calibration.When the large blue vent cap was loosened, it had not been re-tightened fully prior to use in the line, causing a leak from the cap.All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.

• Brand Name: SHUNT SENSOR SYS500
• Type of Device: BLOOD GAS MONITOR
• Manufacturer (Section D): TERUMO CARDIOVASCULAR SYSTEMS CORPORATION; 125 blue ball road; elkton MD 21921
• MDR Report Key: 8086767
• MDR Text Key: 128055135
• Report Number: 1124841-2018-00294
• Device Sequence Number: 1
• Product Code: DRY
• UDI-Device Identifier: 00699753160767
• UDI-Public: (01)00699753160767
• Combination Product (y/n): N
• PMA/PMN Number: K972962
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup,Followup
• Report Date: 12/20/2018

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/19/2018
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 02/28/2019
• Device Model Number: CDI510H
• Device Catalogue Number: N/A
• Device Lot Number: WD26F
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/19/2018
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 12/20/2018
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1