• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MEDTRONIC IRELAND RESOLUTE ONYX RX STENT, CORONARY, DRUG-ELUTING

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MEDTRONIC IRELAND RESOLUTE ONYX RX STENT, CORONARY, DRUG-ELUTING Back to Search Results
Model Number RONYX35018UX
Device Problems Deflation Problem; Inflation Problem; Migration or Expulsion of Device ; Difficult to Remove
Event Date 12/05/2018
Event Type  Injury  
Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

 
Event Description

An attempt was made to use one resolute onyx coronary drug eluting stent to treat a lesion. The device was inspected with no issues. Negative prep was performed with no issues. It was reported that the balloon of the device would not deflate at the lesion site, therefore a subsequent balloon was required to fully deploy the stent. The patient is reported to be alive with no injury.

 
Manufacturer Narrative

Relevant history: history of cad and stemi. Presented with moderate to severe lad disease, and pain during exertion and even at rest due to ischemia additional information: the proximal and mid lad was calcified. The lesion was pre-dilated with a 2. 75 x 8mm non-medtronic balloon at 10atm. The 3. 5 x 18mm resolute onyx inflated only at the edges initially. The stent was partially deployed. Multiple unsuccessful attempts were made to inflate the balloon. It was difficult to remove the stent delivery balloon from the partially deployed stent. It was reported that the stent moved backwards. A 2. 5 x 12mm non-medtronic balloon was used to post dilate the stent at 15atm. A very good result was achieved. Then, a 3. 5 x 12mm non-medtronic balloon was used to post dilate the stent at 12atm. An excellent result was achieved. Then another 3. 5 x 8mm resolute onyx was deployed directly after the 3. 5 x 18mm resolute onyx at 12 atm. Both stents were then post-dilated at 12atm. An excellent result was achieved with no complications. Product analysis summary: the balloon was deflated on return. Crystallized contrast was visible in the balloon and inflation lumen. There was no stretching evident to proximal balloon bond. The delivery system was placed in the water bath to disperse the crystallized contrast in order to aid inflation. The delivery system was inflated to nominal pressure of 12atm with no issues noted. The balloon deflated from rbp of 18atm in 11 seconds with no issues noted. No damage was evident to the remainder of the delivery system. If information is provided in the future, a supplemental report will be issued.

 
Manufacturer Narrative

Additional info: no difficulties removing the protective sheath or stylet of the device. An attempt was made to use one resolute onyx rx drug eluting stent to treat a long stenosed lesion in the proximal lad exhibiting 70-80% stenosis. During delivery, no resistance was encountered. The device was not moved or re-positioned at the lesion. It was reported that the stent balloon would not inflate in the center. It was reported that the balloon of the device would not deflate at the lesion site following the first inflation. The balloon deflated slowly. 50/50 contrast / saline was used. The patient is reported to be alive with no injury. The physician kept pulling negative prep until the balloon free of stent. A subsequent balloon was required to fully deploy the stent. If information is provided in the future, a supplemental report will be issued.

 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand NameRESOLUTE ONYX RX
Type of DeviceSTENT, CORONARY, DRUG-ELUTING
Manufacturer (Section D)
MEDTRONIC IRELAND
parkmore business park west
galway
Manufacturer (Section G)
MEDTRONIC IRELAND
parkmore business park west
galway
Manufacturer Contact
toni o'doherty
parkmore business park west
galway  
091708734
MDR Report Key8169654
Report Number9612164-2018-03649
Device Sequence Number1
Product CodeNIQ
Report Source Manufacturer
Source Type COMPANY REPRESENTATIVE,HEALTH
Reporter Occupation
Type of Report Initial,Followup,Followup
Report Date 03/12/2019
1 Device Was Involved in the Event
1 Patient Was Involved in the Event
Date FDA Received12/17/2018
Is This An Adverse Event Report? Yes
Is This A Product Problem Report? Yes
Device Operator HEALTH PROFESSIONAL
Device EXPIRATION Date05/06/2019
Device MODEL NumberRONYX35018UX
Device Catalogue NumberRONYX35018UX
Device LOT Number0008618053
Was Device Available For Evaluation? Device Returned To Manufacturer
Date Returned to Manufacturer02/12/2019
Is The Reporter A Health Professional? No
Was the Report Sent to FDA?
Event Location No Information
Date Manufacturer Received02/15/2019
Was Device Evaluated By Manufacturer? Yes
Date Device Manufactured05/06/2017
Is The Device Single Use? Yes
Is this a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial

Patient TREATMENT DATA
Date Received: 12/17/2018 Patient Sequence Number: 1
-
-