WRIGHTS LANE SYNTHES USA PRODUCTS LLC PSI SD800.433 PEEK IMPLANT; PLATE, CRANIOPLASTY, PREFORMED, NONALTERABLE
|
Back to Search Results |
|
Model Number SD800.433 |
Device Problem
Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problems
Unspecified Infection (1930); No Code Available (3191)
|
Event Type
Injury
|
Manufacturer Narrative
|
Complainant part is not expected to be returned for manufacturer review/investigation.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.A device history record review has been requested.(b)(4).Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on an unknown date, two (2) peek implants were replaced.It is unknown why the implants were replaced.Patient and procedure involvement is unknown.This report is for a psi polyether ether ketone (peek) implant.This is report 1 of 2 for (b)(4).
|
|
Event Description
|
This is report 1 of 3 for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on (b)(6) 2018, patient underwent a patient specific (psi) polyetheretherketone (peek) implant removal due to a suspected infection.It is unknown when was the device originally implanted.It is unknown if there was a surgical delay.Patient and procedure outcome of the removal procedure is unknown.
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device history lot part number: sd800.433, lot number: h569407, place of manufacture: brandywine, date of manufacture: 13 february 2018.List of nonconformances: none.Review of the device history record for this part showed that there were no issues during the manufacture of the product that would contribute to this complaint condition.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device history records review was completed for part: sd800.433, lot: h569407.Manufacturing location: brandywine, manufacturing date: feb 13, 2018.No non conformance reports were generated during production.Review of the device history records showed that there were no issues during the manufacture of the product that would contribute to this complaint condition.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on (b)(6) 2018 patient underwent hardware removal procedure due to suspected infection.Two peek implants were replaced.Patient and procedure outcome are unknown.This is report 1 of 2 for (b)(4).
|
|
Search Alerts/Recalls
|
|
|