Catalog Number 702877 |
Device Problems
Break (1069); Improper or Incorrect Procedure or Method (2017)
|
Patient Problem
Internal Organ Perforation (1987)
|
Event Date 12/11/2018 |
Event Type
Injury
|
Manufacturer Narrative
|
Device will not be returned.If additional information becomes available it will be provided on a supplemental report.It was disposed in the hospital.
|
|
Event Description
|
Drill was broke during drilling the backward of the pelvis bone and it was left in the patient body.During operation, nurse incorrectly inserted the 3.5mm depth gauge was inserted into the 4,5mm/6.5 mm depth gauge external cylinder and the doctor perforated the pelvis.The doctor request : since there is no mark of difference in size, it is not noticed even if it is wrong.Tip of the drill was left in the patient body.
|
|
Manufacturer Narrative
|
The reported event that depth gauge for screws: ø4.5/6.5mm was alleged of 'mix-up' could not be confirmed, since the device was not returned for evaluation and no other evidences were provided.Based on the given information, the root cause was attributed to be user related.The failure was caused by user error.Given information: nurse incorrectly inserted the 3.5mm depth gauge was inserted into the 4,5mm/6.5 mm depth gauge external cylinder.The device inspection revealed the following: note that no devices were returned for investigation, nevertheless the attached image documentation will explain how these two device sets should be used: (pictures taken from our test set).Two different instrument sets; top (short) for ø2.7/3.5/4.0mm and bottom (long) for ø4.5/6.5mm screws.The diameters which are engraved in both inner and outer parts on either set are clearly sufficient in order to differentiate these devices.Therefore please ensure to check this prior us in order to eliminate any confusion.A review of the device history was not possible because the lot number was not communicated.No corrective actions are required at this time.A review of the labeling did not indicate any abnormalities.No indications of material, manufacturing or design related problems were found during the investigation.If the device is returned or if any additional information is provided, the investigation will be reassessed.
|
|
Event Description
|
Drill was broke during drilling the backward of the pelvis bone and it was left in the patient body.During operation, nurse incorrectly inserted the 3.5mm depth gauge was inserted into the 4,5mm/6.5 mm depth gauge external cylinder and the doctor perforated the pelvis.The doctor request : since there is no mark of difference in size, it is not noticed even if it is wrong.Tip of the drill was left in the patient body.
|
|
Search Alerts/Recalls
|