• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BALT USA, LLC BARRICADE COIL SYSTEM

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BALT USA, LLC BARRICADE COIL SYSTEM Back to Search Results
Model Number 9001050202CF10
Device Problems Difficult or Delayed Positioning (1157); Entrapment of Device (1212); Difficult to Remove (1528)
Patient Problems Aneurysm (1708); Patient Problem/Medical Problem (2688)
Event Date 02/04/2019
Event Type  malfunction  
Manufacturer Narrative
To whom it may concern: on february 15, 2019, we received a complaint regarding the use of a single barricade coil (2mm x 2cm complex finish coil)."it was planned as balloon assisted procedure for ic-pc recanalization.After placing 11th coil, the physicians decide to switch to stent assisted technique.The balloon was retreated, and the stent was placed through sl10 using jail technique.Then, the physicians started to use barricade coils for finishing.When the physician was to reposition 16th coil, feeling of pusher wire was missed.The coil was unraveled, and he could not withdraw the coils through the pusher wire.Using prowler select plus and goose neck snare, the physician could retreat coil with sl10.There was remained part of unraveled coil out of aneurysm, but it was in the stent.So, they decided to finish procedure.According to the physicians, it was procedure for recanalization and stent assisted.Perhaps the coil interfered with stent or other coils." the results of our investigation following return of the affected device, are summarized as follows: visual analysis revealed the delivery pusher with the introducer removed and the proximal end of the implant coil attached.Proximal to the detachment zone section the implant coil was completely stretched and unraveled, curling or pig tail on pusher wire was observed at the damaged zone.Implant was most likely snagged or caught with another coil when pulling back, which caused the coil to stretch and break.It is highly probable that the damage came as the result of significant strain, applied during placement or manipulation of the device once introduced.The condition of the returned device did however clearly denote that a break following excessive force took place, causing the coil to wedge inside the stent during retrieval.Based on the available information along with the investigation results, the reported complaint was confirmed as the attachment section is damaged.It is highly probable that the root cause of the damage came as the result of significant strain, applied during manipulation.Review of the lot history records for the reported lots did not reveal any in-process or lot-specific issue that could account for the observation.No additional complaints against lot number 062217a have been made for the same issue.Comprehensive analysis of this failure mode has remained subject to monitoring for any unacceptable increase in trend.
 
Event Description
It was reported that: it was planned as balloon assisted procedure for ic-pc recanalization.After placing 11th coil, the physicians decide to switch to stent assisted technique.The balloon was retreated, and the stent was placed through sl10 using jail technique.Then, the physicians started to use barricade coils for finishing.When the physician was to reposition 16th coil, feeling of pusher wire was missed.The coil was unraveled, and he could not withdraw the coils through the pusher wire.Using prowler select plus and goose neck snare, the physician could retreat coil with sl10.There was remained part of unraveled coil out of aneurysm, but it was in the stent.So, they decided to finish procedure.According to the physicians, it was procedure for recanalization and stent assisted.Perhaps the coil interfered with stent or other coils.".
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
BARRICADE COIL SYSTEM
Type of Device
BARRICADE COIL
Manufacturer (Section D)
BALT USA, LLC
29 parker
irvine CA 92618
Manufacturer Contact
charles yang
29 parker
irvine 92618
9497881443
MDR Report Key8400641
MDR Text Key142113115
Report Number3014162263-2019-00001
Device Sequence Number1
Product Code HCG
UDI-Device Identifier00818053021046
UDI-Public00818053021046
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
K151760
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative
Reporter Occupation Other
Type of Report Initial
Report Date 03/07/2019
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received03/07/2019
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date06/22/2019
Device Model Number9001050202CF10
Device Lot Number062217A
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer03/04/2019
Date Manufacturer Received02/15/2019
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured10/01/2018
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
-
-