• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: DRÄGERWERK AG & CO. KGAA ALDUK IV; REGULATORS, HIGH-PRESSURE GAS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

DRÄGERWERK AG & CO. KGAA ALDUK IV; REGULATORS, HIGH-PRESSURE GAS Back to Search Results
Catalog Number 5790093
Device Problems Flare or Flash (2942); Temperature Problem (3022)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 02/12/2019
Event Type  malfunction  
Manufacturer Narrative
The affected alduk iv was provided for the investigation.In a visual inspection, it was found that the bottle connection is sooty.No further damage could be detected.After replacing the o-ring in the bottle connection, a functional test was performed in which no deviation could be detected.There is no indication of a device malfunction.The alduk iv passed the normative test for resistance to internal flammability when exposed to oxygen pressure surges (test according to (b)(6)) and is approved in accordance with iso 10524-1: 2006.The dimension and size of the alduk bottle connection are according to the valid standard (b)(4) in the version for the (b)(6) market.The connection is safe when handled correctly.In case the alduk iv is connected to the gas cylinder without gas pressure, the cylinder connection may become loose.The instructions for use include the warning that the valve should always be opened slowly so that such leaks are noted.In addition, it warns that the cylinder connection must be checked for tightness before each opening of the cylinder valve.If this does not happen and the gas escapes through leakage, there is a possibility that the alduk will heat up due to heat generated by the gas flow and burn the connection seal.
 
Event Description
It was reported that an alduk 4 became hot during use, the seal charred and a flash was seen.According to the user, the bottle was changed correctly and properly connected by hand.No injury was reported.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ALDUK IV
Type of Device
REGULATORS, HIGH-PRESSURE GAS
Manufacturer (Section D)
DRÄGERWERK AG & CO. KGAA
moislinger allee 53-55
lübeck 23542
GM  23542
Manufacturer Contact
sonja hillmer
moislinger allee 53-55
lübeck 23542
GM   23542
4518822868
MDR Report Key8420171
MDR Text Key138936693
Report Number9611500-2019-00083
Device Sequence Number1
Product Code CAN
Combination Product (y/n)N
Reporter Country CodeGM
PMA/PMN Number
-
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,user f
Reporter Occupation Biomedical Engineer
Type of Report Initial
Report Date 03/14/2019
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received03/14/2019
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date01/01/2000
Device Catalogue Number5790093
Was Device Available for Evaluation? Yes
Is the Reporter a Health Professional? Yes
Date Manufacturer Received02/12/2019
Was Device Evaluated by Manufacturer? No
Date Device Manufactured06/30/2018
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Patient Sequence Number1
-
-