Catalog Number ARD568812960 |
Device Problem
Crack (1135)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 03/29/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
The issue is still being investigated by manufacturing site.(b)(4).
|
|
Event Description
|
On (b)(4) 2019 maquet (b)(4) became aware of an issue with one of surgical lights- volista.As it was stated, the crack on the bracket was found by the technician during maintenance of the device.There was no injury reported however we decided to report the issue in abundance of caution as the crack may lead to the detachment of the light head and it may lead to a serious injury or worse.(b)(4).
|
|
Manufacturer Narrative
|
The issue is still being investigated by manufacturing site.
|
|
Event Description
|
(b)(4).
|
|
Manufacturer Narrative
|
The issue is still being investigated by manufacturing site.
|
|
Event Description
|
Manufacturer reference number (b)(4).
|
|
Manufacturer Narrative
|
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
|
|
Event Description
|
Manufacturer reference number (b)(4).
|
|
Manufacturer Narrative
|
The issue is still investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
|
|
Event Description
|
Manufacturer reference number (b)(4).
|
|
Manufacturer Narrative
|
Maquet sas became aware of an issue with surgical light volista device related to cracked bracket.It was established that when the event occurred, the surgical light did not meet its specification and it contributed to event.At the time when the event occurred the device was not being used for the patient treatment.During the investigation it was found that the occurrence rate for the issue of the light head shaft breaking is low (total of (b)(4) complaints in the last 5 years of daily use of a large number of similar devices).The investigation was performed by product specialists at the manufacturer.It was established that the root cause of this incident is that one of three screws and its lock washer is missing.The lack of marks on metal at the screw location is concrete evidence of that fact.This screw has been forgotten on the assembly line during manufacturing process.The control process has been reinforced since january, 2016 and the check of the presence of these 3 screws is now required.To sum up, the issue occurrence is due to manufacturing-man error.The affected devices are now being updated during field safety corrective action msa-2018-001-iu.The device involved in the event was found to be in the scope of mentioned fsca and action was performed on march, 2019, therefore getinge does not propose any other action at this time.
|
|
Event Description
|
Manufacturer reference number: 2019-63108.
|
|
Search Alerts/Recalls
|