MAUDE Adverse Event Report: COVIDIEN LP LLC NORTH HAVEN SURGIPRO; MESH, SURGICAL, POLYMERIC

Model Number SPM-35-W

Device Problems Migration or Expulsion of Device (1395); Adverse Event Without Identified Device or Use Problem (2993)

Patient Problems Abscess (1690); Adhesion(s) (1695); Cyst(s) (1800); Purulent Discharge (1812); Foreign Body Reaction (1868); Unspecified Infection (1930); Inflammation (1932); Necrosis (1971); Pain (1994); Hernia (2240); Injury (2348); Ascites (2596); Fibrosis (3167); No Code Available (3191); Nodule (4551); Unspecified Tissue Injury (4559); Appropriate Clinical Signs, Symptoms, Conditions Term / Code Not Available (4581)

Event Type  Injury  

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Event Description

The patient¿s attorney alleged a deficiency against the device.The product was used for therapeutic treatment of a hernia.It was reported that after implant, the patient experienced an adverse outcome.

Event Description

The patient¿s attorney alleged a deficiency against the device.The product was used for therapeutic treatment of a ventral incisional hernia.It was reported that after implant, the patient experienced recurrence, mesh crumpled, adhesions, infection, abscess, fibrosis, fat necrosis, chronic inflammation, foreign body reaction, small subcutaneous fluid collection, pain, cyst containing purulent fluid, abdominal wall mass, and spontaneous purulent drainage from prior midline incision.Post-operative patient treatment included revision surgery, repair of hernia with mesh, exploratory laparotomy, lysis of adhesions, excision of old mesh, evacuation of abscess, and excisional debridement of skin.

Manufacturer Narrative

This information was received as a part of an extensive mesh litigation submission to medtronic.The fda was notified of this large complaint receipt.Due to the volume of complaint information received by medtronic, this resulted in a report beyond the 30 day target.Patient code-c64343(abdominal wall mass) medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

This information was received as a part of an extensive mesh litigation submission to medtronic. the fda was notified of this large complaint receipt.  due to the volume of complaint information received by medtronic, this resulted in a report beyond the 30 day target.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

The patient¿s attorney alleged a deficiency against the device.The product was used for therapeutic treatment of a ventral incisional hernia.It was reported that after implant, the patient experienced recurrence, mesh crumpled, adhesions, infection, and abscess.Post-operative patient treatment included revision surgery, repair of hernia with mesh, exploratory laparotomy, lysis of adhesions, excision of old mesh, and evacuation of abscess.

Event Description

The patient¿s attorney alleged a deficiency against the device.The product was used for therapeutic treatment of a ventral incisional hernia.It was reported that after implant, the patient experienced mesh migration, recurrence, mesh crumpled, adhesions, infection, abscess, fibrosis, fat necrosis, chronic inflammation, foreign body reaction, small subcutaneous fluid collection, pain, cyst containing purulent fluid, abdominal wall mass, and spontaneous purulent drainage from prior midline incision.Post-operative patient treatment included ct scan, medication, revision surgery, repair of hernia with mesh, exploratory laparotomy, lysis of adhesions, excision of old mesh, evacuation of abscess, and excisional debridement of skin.

Manufacturer Narrative

Additional info: a4, b5, b7, d8, e1 (facility name, street, city, region, postal code), h6 (patient codes, imf codes, updated all codes, ime e2402: "mass").Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: SURGIPRO
• Type of Device: MESH, SURGICAL, POLYMERIC
• Manufacturer (Section D): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven 06473
• Manufacturer (Section G): COVIDIEN LP LLC NORTH HAVEN; 195 mcdermott rd; north haven 06473
• Manufacturer Contact: justin ellis ; 60 middletown ave; 8200 coral sea st ne; mounds view,mn, CT 55112 ; 7635265677
• MDR Report Key: 8687074
• MDR Text Key: 147599206
• Report Number: 1219930-2019-03383
• Device Sequence Number: 1
• Product Code: FTL
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K915526
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Consumer
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 03/31/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 06/11/2019
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: SPM-35-W
• Device Catalogue Number: SPM-35-W
• Device Lot Number: AOA170
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 03/29/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention; Other
• Patient Sex: Male
• Patient Weight: 145 KG