• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: DEPUY ORTHOPAEDICS INC US G C.A.P. HUM HD SHAPER 44X15; EXTREMITY INSTRUMENTS : REAMERS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

DEPUY ORTHOPAEDICS INC US G C.A.P. HUM HD SHAPER 44X15; EXTREMITY INSTRUMENTS : REAMERS Back to Search Results
Catalog Number 223081030
Device Problems Material Twisted/Bent (2981); Mechanical Jam (2983)
Patient Problem Not Applicable (3189)
Event Date 01/01/2019
Event Type  malfunction  
Manufacturer Narrative
Product complaint # (b)(4).If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
 
Event Description
Global cap reamers not working - locking mechanism was disengaging when pressure is applied.Was surgery delayed due to the reported event? --> yes.If yes, number of minutes: --> 30.Action taken when event occurred? --> tried to lock mechanism once again dental burr was used to achieve similar result as reamer.Was procedure successfully completed? --> yes.Patient status/ outcome / consequences --> no.
 
Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Product complaint #
=
> (b)(4).Investigation summary
=
> the products were returned to (b)(4) where the engineering technician confirmed the complainants findings.The products were all over 12 years old and showed signs of wear and tear which was deemed to be the reason that the products were not performing as expected.The complaint was found to be justified with a route cause of normal wear.The problem instruments will be disposed of.If information is obtained that was not available for the initial medwatch, a follow-up medwatch, a follow-up medwatch will be filed as appropriate.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
G C.A.P. HUM HD SHAPER 44X15
Type of Device
EXTREMITY INSTRUMENTS : REAMERS
Manufacturer (Section D)
DEPUY ORTHOPAEDICS INC US
700 orthopaedic drive
warsaw IN 46582 0988
MDR Report Key8862006
MDR Text Key153856240
Report Number1818910-2019-100114
Device Sequence Number1
Product Code HTO
UDI-Device Identifier10603295105022
UDI-Public10603295105022
Combination Product (y/n)N
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Type of Report Initial,Followup
Report Date 06/24/2019
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received08/05/2019
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue Number223081030
Device Lot NumberA0105
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer07/17/2019
Date Manufacturer Received09/03/2019
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Age74 YR
-
-