Genicon has completed a thorough review of all available records related to this device and associated lot numbers.Records indicate that these lots passed all manufacturing and quality control inspections.All raw materials used passed incoming quality control checks and no irregularities or abnormalities were found.Review of vigilance reports did not reveal any trends, with respect to an increase in frequency or a trend to a specific lot.The suspect device was able to be retained and shipped to genicon for evaluation.A thorough evaluation of the returned device was completed by engineering, indicating the device was retuned with the distal end of the introducer flared outward.Device design and subsequent testing has established that the flaring of the introducer tube does not impact the device performance.The flare aids in retraction of the bag and inhibits that potential for the introducer to fracture.Given the compliant nature of the introducer, introduction down an appropriate size cannula is accomplished within the specified performance limits.The narrative indicated this device was not able to be used, however testing has revealed that flaring of this nature/degree only appears after a significant number of uses.Therefore it may have been the case that this device was attempted to be retracted several times, but never actually used.It is important to note that during retraction of the bag air will build up and become caught.This air can be exhausted from the bag by squeezing the still deployed end as shown in the instructions for use to aid is easier bag retraction.Care should be taken to follow all warnings, precautions and directions detailed in the instructions for use to ensure the highest level of safety and patient care.Genicon will continue to monitor this issue through our vigilance system for trends and take appropriate actions as necessary to ensure the continued performance and safety of the product.
|