Model Number 11426964 |
Device Problem
Appropriate Term/Code Not Available (3191)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 11/27/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
Although requested, the affected product has not been received.A follow up report will be submitted with investigation results should the devices be received for evaluation.
|
|
Event Description
|
The reported feedback suggests that there is a failure of safety clamp on iv administration set to be activated on removal of line from alaris system lvp channel.From the reported information there are no indications of serious injury to the patient or user as a result of this incident.
|
|
Manufacturer Narrative
|
D.11."additional concomitant product 11426965.A review of the production records for lot 19075574 did not identify any in-process testing failures or quality deviations which may have resulted in a report of this nature.Two 11426964 samples were received for investigation with residual fluid within the line; no packaging was received with the sample, however the customer indicates the affected lot number to be 19075574.Additionally two iv bags (a 1000 ml nacl freeflex and a 500ml baxter with carboplatin) and a 11426965 infusion set were received connected to the samples to assist the investigation.As part of the investigation the customer also returned an alaris system lvp pump module.A visual inspection of all the samples received did not identify any signs of damage or manufacturing defects which could have contributed to the customer's experience.Functional testing was performed by placing each set in the lvp pump received from the customer and continuously opening and closing the pump door; in each instance the flow stop was noted to be correctly activated.The samples were then subjected to pressure testing while the flow stop was occluded; no fluid flow was noted to move beyond the flow stop in each instance.A performance verification procedure (pvp) test was then performed on the returned pump in accordance with the technical services manual (tsm); the results for the rate accuracy and occlusion alarm threshold were noted to be out of specification.The pump was then recalibrated and the rate accuracy brought back into specification; however, testing of the patient side pressure sensor identified that the readings were too high to be re-calibrated.The module passed all other functional tests.It was not possible to confirm the root cause of the customer¿s experience in this instance.Testing of the returned sample did not identify any product defects or quality deviations that could have contributed to the customer¿s experience.A review of the customer feedback database indicates that this is a rare occurrence with this customer being the only customer to provide this type of feedback against products in the alaris system product family in the past 12 months.H3 other text : see section h.10.
|
|
Event Description
|
The reported feedback suggests that there is a failure of safety clamp on iv administration set to be activated on removal of line from alaris system lvp channel.From the reported information there are no indications of serious injury to the patient or user as a result of this incident.
|
|
Search Alerts/Recalls
|