Model Number 1180320112 |
Device Problems
Crack (1135); Fluid/Blood Leak (1250)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 01/14/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
The incident sample has been requested but to date has not been received for evaluation.If the sample is received, or if additional information pertinent to the incident is obtained a follow-up report will be submitted.As part of our manufacturing process, all device history records are reviewed and approved by quality, prior to release of product.
|
|
Event Description
|
The customer reported the device was leaking due to cracks in the body of the syringe.This was noticed in the rheumatology department while administering.There was no harm to the patient.
|
|
Manufacturer Narrative
|
A review of the device history record revealed no discrepancies that may have contributed to the reported condition.All quality assurance testing is performed during the manufacturing of the product met specification requirements.Samples were submitted for analysis as well photographs that confirmed the reported condition.The most likely cause for the reported condition could occur during the manufacturing process when loading the machine which would be indicative of the positioning foot not contacting the finger rests as intended.The cracked barrels also exhibit abrasions near the finger rests of the syringe.The investigation did not identify a systemic issue with the product or process, no trend exists for the failure mode, and a specific root cause could not be identified based on available information.Therefore, at this time a corrective and preventive action (capa) is not necessary.
|
|
Search Alerts/Recalls
|