|
Model Number 366126 |
Device Problem
Leak/Splash (1354)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 12/24/2019 |
Event Type
malfunction
|
Event Description
|
The passeo-18 balloon catheter was selected for use.During the procedure, the balloon could not be inflated more than 2 atm.After removal, a hole was detected at the end of the balloon.
|
|
Manufacturer Narrative
|
The returned instrument was subjected to a technical analysis and the corresponding production documentation was reviewed to establish whether a deviation from the manufacturing process could be the cause for the reported event.The technical investigation of the returned product revealed that both the balloon and the device shaft have fractured.The balloon shows clear signs of inflation.The balloon has burst transversally.Microscopic inspection of the balloon fragments showed several deep scratches in close vicinity of the fracture sites.The distal device shaft is severely deformed and has fractured, indicating high tensile force which was most likely applied after the balloon burst.Review of the production documentation of the product detailed above verified that the instrument was manufactured according to specifications and fulfilled all the requirements of in-process and final inspection.In addition to visual inspections each instrument is tested for air tightness by means of a helium leak test and a pressure test.Based on the conducted investigations of the device being subject to this complaint, no material or manufacturing related root cause could be determined.Due to the scratch marks in close vicinity to the fracture sites it seems likely that the balloon burst was induced by the patients anatomy and the fracture of the device shaft is most likely a secondary effect during withdrawal.
|
|
Search Alerts/Recalls
|
|
|