Model Number RONYX22518UX |
Device Problems
Activation, Positioning or Separation Problem (2906); Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problems
Chest Pain (1776); Thrombus (2101)
|
Event Date 01/23/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
If information is provided in the future, a supplemental report will be issued.
|
|
Event Description
|
A resolute onyx rx coronary drug eluting stent was used during a procedure to treat a moderately tortuous lesion in the distal right posterior descending (r-pda) artery.There was no damage noted to the packaging.There were no issues noted when removing the device from the hoop.The device was inspected with no issues.The device did pass through a previously deployed stent.It was reported that distal r-pda stent thrombosis occurred post deployment of the stent.
|
|
Manufacturer Narrative
|
Additional information: negative prep was performed.The lesion was pre-dilated.Resistance was encountered when advancing the device.A contrast image confirms no flow in the proximal rca.The following procedural images confirm good contrast flow in the rca.The images provided do not show all elements reported from the account or any issue with the resolute onyx stent.If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
Additional information: it was stated that the patient had very calcified vessels with extreme tortuosity.It was stated that the physician had very little support during the case.The wire went subinternal and the stent was deployed in this space with suboptimal expansion.It was stated that the onyx was placed subintimal.The stent was not post-dilated.It was reported that distal r-pda stent thrombosis occurred post deployment of the stent.It was later reported that the onyx did not cause the thrombus.The thrombus was present prior to delivering the stent.It was also later reported that the rpda flow was lost during the procedure and was not due to stent thrombosis as previously reported and there was no issue with the stent or the stent platform.There was no flow distal to the resolute onyx device and it was decided to end the case.The patient's chest pain did not get better and the patient was later brought back to try and get the distal part open, during which a non-medtronic wire dislodged distal to the stent.The patient was receiving dapt during and after the procedure.If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
Correction: device code (b)(4), adverse event and product problem selected.If information is provided in the future, a supplemental report will be issued.
|
|
Search Alerts/Recalls
|