• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: INVATEC SPA MO.MA ULTRA; CATHETER, CAROTID, TEMPORARY, FOR EMBOLIZATION CAPTURE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

INVATEC SPA MO.MA ULTRA; CATHETER, CAROTID, TEMPORARY, FOR EMBOLIZATION CAPTURE Back to Search Results
Catalog Number MOM0130069X6
Device Problems Difficult to Insert (1316); Leak/Splash (1354); Physical Resistance/Sticking (4012)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 02/05/2020
Event Type  malfunction  
Manufacturer Narrative
If information is provided in the future, a supplemental report will be issued.
 
Event Description
A carotid guardwire temporary occlusion device was used during a carotid artery stenting (cas) to treat a mildly tortuous, non calcified lesion in the internal carotid artery (ica).The device was removed from packaging per ifu.The device was inspected.The device was prepped per ifu.No kink or damage was noted before use.The guardwire product was used with moma ultra.At the end of the procedure and after the stent was implanted and post-dilation was complete, debridement was aspirated using an asp iration catheter.When inserting into moma ultra, there was resistance, so a y connector was removed and then inserted.The aspiration was performed.It was reported that the occlusion balloon catheter did not remain inflated until the aspiration was completed.The balloon deflated in the middle of aspiration.It was reported that there was resistance between the moma ultra lumen and the carotid guard wire when the device was removed.It was reported that when they checked the carotid guard wire after it was pulled out, the carotid guard wire was kinked/fractured half way on the shaft of the wire.It was reported that the occlusion balloon deflated during the transition from kink to fracture.When pulling out the carotid guard wire, it seemed that fracture occurred when the product was removed near the outlet port of the sheath or at they connector.Or the fracture occurred when the product was removed out of the body, or the fracture occurred eventually outside the body.It was also reported that though it had been instructed that the aspiration catheter could not be used during the moma ultra usage, it was also used during the post market surveillance (pms) use-results survey period.The patient is alive with no injury.
 
Manufacturer Narrative
Updated d4:¿catalog # additional information: the device was safely removed from the patient.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
 
Manufacturer Narrative
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.
 
Manufacturer Narrative
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
MO.MA ULTRA
Type of Device
CATHETER, CAROTID, TEMPORARY, FOR EMBOLIZATION CAPTURE
Manufacturer (Section D)
INVATEC SPA
via martiri della liberta, 7
roncadelle 25030
IT  25030
MDR Report Key9823263
MDR Text Key221029052
Report Number3004066202-2020-00012
Device Sequence Number1
Product Code NTE
Combination Product (y/n)N
PMA/PMN Number
K092177
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Type of Report Initial,Followup,Followup,Followup
Report Date 07/29/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received03/12/2020
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date04/04/2021
Device Catalogue NumberMOM0130069X6
Device Lot Number1M002839
Was Device Available for Evaluation? No
Date Manufacturer Received07/29/2020
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
-
-