Model Number TENODESIS SCREW, PEEK |
Device Problem
Break (1069)
|
Patient Problem
Device Embedded In Tissue or Plaque (3165)
|
Event Date 02/26/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
The contribution of the device to the reported event could not be determined as the device was not returned for evaluation.The root cause of the event could not be determined from the information available and without device evaluation.
|
|
Event Description
|
It was reported that two peek tenodesis screws, ar-1530ps, were being used in a ucl reconstruction procedure.When the surgeon went to insert one of the screws into the prepared bone, the distal tip of the driver broke off into the head of the screw.The surgeon was unable to remove the tip fragment from the screw and it remained in the head of the screw in the patient.The second peek screw was implanted without any issue.
|
|
Event Description
|
Additional information provided 5/28/2020: the tip from three drivers broke however there were only two fragments from two drivers that were left in the patient.There was one additional driver that was returned for evaluation.This fourth driver was also used in the procedure but it is unlikely that the tip broke.
|
|
Manufacturer Narrative
|
The following additional information obtained has been added to section b5: additional information provided 5/28/2020: the tip from three drivers broke however there were only two fragments from two drivers that were left in the patient.There was one additional driver that was returned for evaluation.This fourth driver was also used in the procedure but it is unlikely that the tip broke.Complaint confirmed, the hexagonal drive feature of three drivers were broken.The 4th device was returned undamaged.The devices were found to meet specifications.Likely causes of the event include improper bone prep, misaligned insertion, prying/leveraging the device during insertion.
|
|
Search Alerts/Recalls
|