• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Product Classification

  • Print
  • Share
  • E-mail
-
New Search Back to Search Results
Device burr, corneal, battery powered, rust ring removal
Regulation Description Powered corneal burr.
Definition A powered corneal burr is an AC-powered or battery-powered device that is a motor and drilling tool intended to remove rust rings from the cornea of the eye and is class I exempt when intended only for rust ring removal.
Physical State A powered corneal burr is an AC-powered or battery-powered device that is a motor and drilling tool intended to remove rust rings from the cornea of the eye and is class I exempt when intended only for rust ring removal.
Technical Method A powered corneal burr is an AC-powered or battery-powered device that is a motor and drilling tool intended to remove rust rings from the cornea of the eye and is class I exempt when intended only for rust ring removal.
Target Area A powered corneal burr is an AC-powered or battery-powered device that is a motor and drilling tool intended to remove rust rings from the cornea of the eye and is class I exempt when intended only for rust ring removal.
Regulation Medical Specialty Ophthalmic
Review Panel Ophthalmic
Product CodeOHW
Premarket Review Office of Ophthalmic, Anesthesia, Respiratory, ENT and Dental Devices (OHT1)
Ophthalmic Devices (DHT1A)
Submission Type 510(K) Exempt
Regulation Number 886.4070
Device Class 1
Total Product Life Cycle (TPLC) TPLC Product Code Report
GMP Exempt? No
Summary Malfunction
Reporting
Eligible
    Note: FDA has exempted almost all class I devices (with the exception of reserved devices) from the premarket notification requirement, including those devices that were exempted by final regulation published in the Federal Registers of December 7, 1994, and January 16, 1996. It is important to confirm the exempt status and any limitations that apply with 21 CFR Parts 862-892. Limitations of device exemptions are covered under 21 CFR XXX.9, where XXX refers to Parts 862-892.
If a manufacturer's device falls into a generic category of exempted class I devices as defined in 21 CFR Parts 862-892, a premarket notification application and fda clearance is not required before marketing the device in the U.S. however, these manufacturers are required to register their establishment. Please see the Device Registration and Listing website for additional information.
Implanted Device? No
Life-Sustain/Support Device? No
Third Party Review Not Third Party Eligible
-
-