MAUDE Adverse Event Report: TERUMO CARDIOVASCULAR SYSTEMS CORP. HX2 TEMPERATURE MANAGEMENT SYSTEM; CONTROLLER, TEMPERATURE, CARDIOPULMONARY BYPASS-HX2 TEMPERATURE MANAGEMENT SYS.

Model Number 809810

Device Problem Contamination (1120)

Patient Problems Abscess (1690); Death (1802)

Event Date 09/01/2013

Event Type  Death  

Manufacturer Narrative

(b)(4).This information was received by mail on 05-jan-2016 via a voluntary event report (mw5058675) from the fda.This complaint is related to mdr #1828100-2016-00032, mdr #1828100-2016-00034, and mdr #1828100-2016-00035.Per follow-up with the perfusionist (ccp) on (b)(6) 2016: in regards to all of our heater cooler units, we follow the manufacturer¿s recommendations for cleaning.We clean the units weekly with cip-100, our night staff check the chlorine levels daily and add chlorine if necessary to obtain 3-5 parts per million (ppm).All of our preventive maintenance (pms) are handled and scheduled by the manufacturer.No alleged deficiency, s/n unknown.

Event Description

It was reported the patient was diagnosed two and a half months after use of the device with cardiopulmonary bypass (cpb) procedure with a bloodstream infection, mycobacterium abscessus after a left single lung transplant.The device was not changed out.The surgical procedure was completed successfully.Per the clinical review on (b)(6) 2016: manufacturer clinical services staff spoke with the user facility physicians (mds) of the infectious disease section.Our conversation was in regards to the medwatch reports filed by the hospital in reference to the heater cool unit.This patient was diagnosed with a mycobacterium abscessus infection after a single lung transplant.The transplant occured on (b)(6) 2013 and the infection was diagnosed on (b)(6) 2013.The patient later expired on (b)(6) 2013.According to both mds, there is no connection or association between the heater cooler unit and the patient infection.The hospital was mandated by the state of pennsylvania to retrospectively look back the previous four years for patients that developed mycobacterium infections post cardiothoracic surgery where cpb was used and a heater cooler unit was used during the procedure.This mandate followed the food and drug administration (fda) and (b)(6) safety communications (in regards to mycobacterium infections associated with heater-coolers) in (b)(6) 2015.According to the mds, they would not have filed the medwatch report if this mandate was not in place, because there was no medical or laboratory data to associate the use of the heater cooler unit with these infections.This heater cooler unit has been used and continues to be used at the hospital.According to both mds, there is mycobacteria in the (b)(6) water system and they theorize this was the likley cause of infection in these post-transplant and immunosupressed patients.There was no delay in the procedure and no blood loss associated with the use of the heater cooler unit.The procedure was completed as scheduled and nothing was changed out during the procedure.

Manufacturer Narrative

The reported complaint was not verifiable.No product is being returned for review.The customer stated there was no product deficiency.If additional information becomes available on this complaint that would alter the facts and/or conclusion, a follow-up emdr will be filed accordingly.

• Brand Name: HX2 TEMPERATURE MANAGEMENT SYSTEM
• Type of Device: CONTROLLER, TEMPERATURE, CARDIOPULMONARY BYPASS-HX2 TEMPERATURE MANAGEMENT SYS.
• Manufacturer (Section D): TERUMO CARDIOVASCULAR SYSTEMS CORP.; 6200 jackson road; ann arbor MI 48103
• Manufacturer Contact: jan winder ; 6200 jackson road; ann arbor, MI 48103 ; 7346634145
• MDR Report Key: 5392981
• MDR Text Key: 36883295
• Report Number: 1828100-2016-00033
• Device Sequence Number: 1
• Product Code: DWC
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K071521
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: health professional,other,use
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 02/23/2016

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 01/27/2016
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 809810
• Device Catalogue Number: 809810
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/22/2016
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Patient Outcome(s): Death; Hospitalization