BOSTON SCIENTIFIC CORPORATION FLEXTOME CUTTING BALLOON; CATHETERS, TRANSLUMINAL CORONARY ANGIOPLASTY, PERCUTANEOUS
|
Back to Search Results |
|
Model Number 3822 |
Device Problem
Detachment of Device or Device Component (2907)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 04/09/2020 |
Event Type
malfunction
|
Event Description
|
It was reported that the catheter core wire was fractured.The target lesion was located in the left anterior descending artery.A 10/2.50 flextome cutting balloon was selected for use.During preparation, when the physician unpacked the device, it was noted that the core wire was kinked.Furthermore, when the physician placed the device back into the package, it was noted that the core wire was fractured.The device never entered the patient's body and the procedure was completed with another of the same device.No complications were reported and the patient was stable post procedure.
|
|
Event Description
|
It was reported that the catheter core wire was fractured.The target lesion was located in the left anterior descending artery.A 10/2.50 flextome cutting balloon was selected for use.During preparation, when the physician unpacked the device, it was noted that the core wire was kinked.Furthermore, when the physician placed the device back into the package, it was noted that the core wire was fractured.The device never entered the patient's body and the procedure was completed with another of the same device.No complications were reported and the patient was stable post procedure.
|
|
Manufacturer Narrative
|
Device evaluated by mfr: the device was returned for analysis.The device was received in two sections as a result of a complete break of the hypotube.A visual and tactile examination identified a complete break of the hypotube of the device.The break was located at approximately 400mm distal of the strain relief.The hypotube was also noted to be kinked at approximately 340mm distal of the strain relief.This type of damage is consistent with excessive force being applied to the delivery system.A visual examination identified that the balloon was not subjected to positive pressure.An examination of the balloon identified no issues which could potentially have contributed to this complaint.A visual and microscopic examination identified no damage to the tip, markerbands or blades of the device.All blades were present and fully bonded to the balloon material.No other issues were identified during the product analysis.
|
|
Search Alerts/Recalls
|
|
|