Model Number DX115 |
Device Problem
Component Incompatible (1108)
|
Patient Problem
No Patient Involvement (2645)
|
Event Type
malfunction
|
Manufacturer Narrative
|
Investigation results: there are discolorations and residues remained at the transition between metal part and silicone.The components were examined visually and microscopically.Under microscopic enlargement it can be seen that the metal part is covered with a thin transparent silicon layer.This layer shows several damages.Several residues/contaminations have been deposited in this area.Inspection of unused stored goods: the stored goods show also a thin silicon layer which covers the metal part.This silicon layer shows also partly damages.At this stage of investigation we assume a potential manufacturing error therefore the complaint was forwarded to the manufacturer, as this product is manufactured by third party.Up to now the investigation/statement from the manufacturer is still pending.The product does not require batch management; a review of the device quality and manufacturing history records is not possible.Due to the circumstance that a statement/investigation from the manufacturer side still await it is not possible to determine a root cause for the mentioned failure.The investigation is ongoing.An internal inspection was initiated ((b)(4)).
|
|
Event Description
|
It was reported that there was an issue with a oral silicone wedge.According to the customer it was reported that the product cannot be cleaned properly.During a routine check the customer found residues between the metal insert and the silicone (protein test was positive).There was no patient harm.Additional information was not provided nor available.The malfunction is filed under ((b)(4)).Associated medwatch-reports: 9610612-2020-00175 ((b)(4) - dx113).
|
|
Manufacturer Narrative
|
Additional case created.See b5.
|
|
Event Description
|
Additional product with the notification number (b)(4) was created.Awareness date is 04.28.2020.Associated medwatch report: 9610612-2020-00175 ((b)(4) dx113); 9610612-2020-00176 ((b)(4) dx115).
|
|
Manufacturer Narrative
|
Investigation results: there are discolorations and residues remained at the transition between metal part and silicone.Visual investigation: under microscopic enlargement it can be seen that the metal part is covered with a thin transparent silicon layer.This layer shows several damages (tears).Several residues/contaminations have been deposited in this area.At this stage of investigation we assume a potential manufacturing error therefore the complaint was forwarded to the manufacturer, as this product is manufactured by third party.Up to now the statement from the manufacturer is still pending.Batch history review: the product does not require batch management; a review of the device quality and manufacturing history records is not possible.Conclusion and measures: at that time it is not possible to determine a clear conclusion and root cause for the mentioned failure.Due to the circumstance that a statement/investigation from the manufacturer side still await it is not possible to determine a root cause for the mentioned failure.The investigation is ongoing.As a preventive measure a internal inspection was opened under psc 2020-020 and since no statement of the manufacturer is available, the articles are no longer distributed.
|
|
Search Alerts/Recalls
|