Model Number PCB00 |
Device Problem
Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problems
Vitrectomy (2643); No Code Available (3191)
|
Event Date 03/11/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
If implanted; if explanted; give date: n/a (not applicable).The intraocular lens was removed and replaced during the same procedure.(b)(4).All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Event Description
|
It was reported that an intraocular lens (iol) was removed and replaced with a 3-piece za9003, serial number (b)(4) iol during the initial procedure, because of an unplanned vitrectomy.The patient outcome is unknown.No further information was provided.
|
|
Manufacturer Narrative
|
Device available for evaluation; returned to manufacturer on: 6/17/2020.Device evaluation: the product was received in a plastic bag.The plunger was observed in a fully advanced position and pushrod was bent and exposed out of the cartridge tip.Cartridge was correctly engaged to the device.No assembly error and/or defect related to the manufacturing process was observed in the device.Visual inspection at microscope magnification: small amount of lubricating material residues was observed in the device.The lens was received out of the device.It was cut in pieces, and one of the haptic was broken.According to the information provided the reported issue is not related to the device.Based on the analysis there is no indication of product quality deficiency.Manufacturing records review: the manufacturing records for the product were reviewed.The product was manufactured and released according to specification.Historical data analysis: a search of complaints revealed two additional complaints were received from this production order; however, they are not related to the reported event.Conclusion: as a result of the investigation, there is no indication of a quality product deficiency and the reported issue could not be verified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Manufacturer Narrative
|
This correction mdr is being submitted to address inaccurate information in section f on the xml version of the previous submission caused by a software glitch in the transmission process.The internal non-conformance numbers for this software issue are (b)(4) and capa-010215.
|
|
Search Alerts/Recalls
|