MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARD SILASTIC FOLEY CATHETER

Model Number 33424

Device Problems Fluid/Blood Leak (1250); Material Puncture/Hole (1504)

Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.

Event Description

It was reported that there was a hole in the foley catheter balloon which resulted in water leaking out.

Event Description

It was reported that there was a hole in the foley catheter balloon which resulted in water leaking out.

Manufacturer Narrative

The reported event was inconclusive as no sample was returned for evaluation.A potential root cause for this failure could be due to "non-uniform thin sac and /or finish dip coverage".The lot number was unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: "warning: do not use ointments or lubricants having a petrolatum base.They will damage the catheter.Visually inspect the product for any imperfections or surface deterioration prior to use.¿ use luer tip syringe to inflate with stated ml of sterile water.Or ¿ for pre-filled products, remove clip and squeeze reservoir to inflate with stated ml of sterile water.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.For urological use only.To deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.Allow the pressure within the balloon to force the plunger back and fill the syringe with water.If you notice slow or no deflation, re-seat the syringe gently.Use only gentle aspiration to encourage deflation if needed.Vigorous aspiration may collapse the inflation lumen, preventing balloon deflation.If necessary, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.This is a single use device.Do not resterilize any portion of this device.Reuse and/or repackaging may create a risk of patient or user infection, compromise the structural integrity and/or essential material and design characteristics of the device, which may lead to device failure, and/or lead to injury, illness or death of the patient.Contains or presence of natural rubber latex.Caution: this product contains natural rubber latex which may cause allergic reactions.Recommended inflation capacities 3cc balloon: use 5ml sterile water 5cc balloon: use 10ml sterile water 15cc balloon: use 20ml sterile water 20cc balloon: use 25ml sterile water 30cc balloon: use 35ml sterile water 40cc balloon: use 45ml sterile water 75cc balloon: use 80ml sterile water do not exceed recommended capacities." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the device was not returned.

• Brand Name: BARD SILASTIC FOLEY CATHETER
• Type of Device: SILASTIC FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 10174341
• MDR Text Key: 196422159
• Report Number: 1018233-2020-03945
• Device Sequence Number: 1
• Product Code: EZL
• UDI-Device Identifier: 00801741020025
• UDI-Public: (01)00801741020025
• Combination Product (y/n): N
• PMA/PMN Number: K951103
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: consumer,other
• Type of Report: Initial,Followup
• Report Date: 07/20/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 06/19/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Model Number: 33424
• Device Catalogue Number: 33424
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 06/29/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1