OBERDORF SYNTHES PRODUKTIONS GMBH T-PAL SPACER APPLICATOR KNOB; INTERVERTEBAL FUSION DEVICE W/BONE GRAFT, LUMBAR
|
Back to Search Results |
|
Catalog Number 03.812.004 |
Device Problem
Compatibility Problem (2960)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 01/01/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
Additional narrative: complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
Device report from synthes reports an event in (b)(6) as follows: it was reported that on an unknown date, that during a surgery the instruments were sticking together and could not be disassembled.There was a surgical delay, however the amount of time is unknown.The surgery was successfully completed.The patient was reported to be in a normal status after the surgery.Concomitant devices reported: applicator out shaft (part number 03.812.001, lot unknown, quantity 1), applicator inner shaft (part number 03.812.003, lot unknown, quantity 1).This report involves one (1) t-pal spacer applicator knob.This is report 3 of 3 for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: b3: event year is reported as 2020; however exact date of event is unknown.D4: lot number updated.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Investigation site: cq zuchwil selected flow: device interaction / functional.Visual inspection: the investigation has shown that the applicator knob is completely jammed at the advanced applicator outer shaft and can not released.The applicator knob has some dents visible which could made of a pliers.Functional test: a functional test can not be performed of the jammed applicator knob at the advanced applicator outer shaft.Further attempts (with bench vice) failed to release the jammed connection.Nevertheless, the release button for the advanced applicator inner shaft is fully functional and work as intended.Drawing/specification review: the manufacturing review shows that the production procedures were according to the specifications and there were no issues that would contribute to this complaint condition.The investigation has shown that the cause of complained malfunction is a post-manufacturing caused use related damage at the device.Summary: the received condition agree with the complaint description and the complaint therefore is confirmed.The investigation has shown that the applicator knob is completely jammed at the advanced applicator outer shaft and can not released.The applicator knob has some dents visible which could made of a pliers.These indication led us assume that the device encountered unintended forces, such as a mechanical overload during an improper handling by release the connection (wrong direction), which finally caused the post manufacturing damages.By the evidence, that the device passed our 100% final inspection before the device left the manufacturing site we confirm that the cause of failure is not due to any manufacturing non-conformance's.The connection thread conformed the specification at the time of manufacturing and passed inspection requirements.During the investigation, no product design or manufacturing issues were observed that may have contributed to the complaint condition.The root cause was identified during the performed cq evaluation and therefore the in the investigation flow listed remaining investigation steps "dimensional inspection:" are not required.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed as no product related issue could be detected.Device history lot part number: 03.812.004, lot number: 30p9433, manufacturing site: haegendorf, release to warehouse date: jan.10, 2020.A manufacturing record evaluation was performed for the finished device lot number, and no non-conformances were identified.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|