Type of device: common device name: trinica(r) anterior cervical plate system, trinica(r) select anterior cervical plate system.Without a product return, no product evaluation is able to be conducted.Current information is insufficient to permit a valid conclusion about the cause of this event.If additional information is obtained that adds value to the relevant content of this report and/or a conclusion can be drawn, a follow-up report will be sent.Reference reports 3012447612-2020-00333 to 3012447612-2020-00335.
|
Additional information: d10, h6.Evaluation codes (methods, results, conclusions).The complaint is confirmed for one (1) of three (3) trinca-c screws (part number 07.00117.002) for the reported failure of being worn.The complaint is unconfirmed for two (2) of three (3) trinca-c screws (part number 07.00117.002) for the reported failure of being worn.The severity of this event is 2 (rmf-sp0016-24).This device is used for treatment.No medical records were provided with the complaint.Inspection: identities of the screws was confirmed.One screw showed worn threads while the other two were completely functional.Complaint is confirmed for 1 of the 3 screws.Dhr review: pn 07.00117.002, lot aal.There was one non-conformance associated with this lot related to ink marks on the label.There were three (3) non-conforming pieces in the lot, and all 3 pieces were reworked prior to the lot leaving zimmer biomet control.The device was likely conforming when it left zimmer biomet's control.Pn 07.00117.002, lot aap.There were no non-conformances or temporary deviations associated with the lot.All characteristics inspected upon initial receipt were found conforming to specifications.There are no indications of manufacturing issues which would have contributed to this event and the device was likely conforming when it left zimmer biomet¿s control.Compatibility: reported event is not related to a combination of product lines; therefore a compatibility review is not applicable.Complaint history: pn 07.00117.002.A complaint history review was conducted for part #07.00117.002 and for lot numbers aal and aap.The search for the lot # included all complaints for the lifetime of the lot and the search for the part # included all complaints for the year prior to the notification date of this complaint through when the complaint data was pulled (june 12, 2019 to september 30, 2020).The search identified no additional complaints for the same lots (aal and aap).The search also identified no other complaint parts for the device for the same or similar issue.Potential root cause: as stated in the complaint, the three screws were used during surgery.It is possible that implanting the screws and then removing could have caused the observed wear on the one screw.However, as exact details of the surgery are not available a conclusive cause cannot be determined.Corrective/preventive action: no corrective or preventive actions are recommended at this time.Recall and product hold search : ¿mm03" and "msc3n" searches were conducted in sap for pn 07.00117.002, ln aap and pn 07.00117.002, ln aal for any active holds or recalls.No active holds or recalls were found.
|