MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX I.C. FOLEY CATHETER; FOLEY CATHETER (LATEX)

Model Number 0165SI16

Device Problems Partial Blockage (1065); Obstruction of Flow (2423)

Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.

Event Description

It was reported that the foley catheters kept getting clogged frequently, which resulted in an increase in changing the foley.

Event Description

It was reported that the foley catheters kept getting clogged frequently, which resulted in an increase in changing the foley.

Manufacturer Narrative

The reported event was inconclusive as no sample was returned.The potential root cause for this failure mode could be user related (example: salt accumulation)/ block drainage lumen /no drainage eye.The lot number was unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: "caution: this product contains natural rubber latex which may cause allergic reactions.To deflate catheter balloon: gently insert a luer slip syringe in the catheter valve.Never use more force than is required to make the syringe "stick" in the valve.Allow the pressure within the balloon to force the plunger back and fill the syringe with water.If you notice slow or no deflation, re-seat the syringe gently.Use only gentle aspiration to encourage deflation if needed.Vigorous aspiration may collapse the inflation lumen, preventing balloon deflation.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all recommended inflation capacities 3cc balloon: use 5cc sterile water 5cc balloon: use 10cc sterile water 30cc balloon: use 35cc sterile water warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Catheters should be replaced in accordance with the cdc guideline, "guideline for prevention of catheter-associated urinary tract infection." at the onset or first signs of a urinary tract infection, catheter encrustation, or any other catheterrelated adverse effect, the catheter should be replaced.Do not exceed recommended capacities.Sterile: unless package is opened or damaged.Do not use if package is opened or damaged.Single use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip syringe.Do not use needle.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Visually inspect the product for any imperfections or surface deterioration prior to use.Warning: on catheter, do not use ointments or lubricants having petrolatum base.They will damage latex and may cause the balloon to burst.".

• Brand Name: BARDEX I.C. FOLEY CATHETER
• Type of Device: FOLEY CATHETER (LATEX)
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 10350071
• MDR Text Key: 202515728
• Report Number: 1018233-2020-04884
• Device Sequence Number: 1
• Product Code: MJC
• UDI-Device Identifier: 00801741016752
• UDI-Public: (01)00801741016752
• Combination Product (y/n): N
• PMA/PMN Number: K040658
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: consumer,distributor,other
• Type of Report: Initial,Followup
• Report Date: 09/08/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/31/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Model Number: 0165SI16
• Device Catalogue Number: 0165SI16
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 08/24/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1