Catalog Number M003EZAS30240 |
Device Problem
Premature Activation (1484)
|
Patient Problems
No Consequences Or Impact To Patient (2199); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/02/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
This is a second of two reports.The subject device is unavailable to manufacturer.
|
|
Event Description
|
It was reported that during procedure of the anterior cerebral artery (aca), the subject device stent was released in microcatheter during insertion.The subject device was removed.There were no reported clinical consequences to the patient due to this event.No other information was provided.
|
|
Event Description
|
It was reported that during procedure of the anterior cerebral artery (aca), the subject device stent was released in microcatheter during insertion.The subject device was removed.There were no reported clinical consequences to the patient due to this event.No other information was provided.
|
|
Manufacturer Narrative
|
Due to the automated manufacturing execution system (mes) system there are controls in the manufacturing process to ensure the product met specifications upon release.During analysis, the returned device was visually inspected that the stent was returned in its deployed state and there were no anomalies noted.A functional test was not performed as the stent had been deployed.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.The stent was returned in its deployed state confirming the event, there were no anomalies noted to the stent.It is probable that there were difficulties in advancing the stent through the catheter/ during insertion, causing the premature stent deployment.An assignable cause of procedural factors will be assigned to the reported and analysed 'stent deployed prematurely during use', as the issue is associated with a product that meets stryker design and manufacture specifications and was used in according with the dfu but due to procedural and/or anatomical factors during use, the product performance was limited.
|
|
Search Alerts/Recalls
|