MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX ALL-SILICONE FOLEY CATHETER

Model Number 165816

Device Problems Break (1069); Burst Container or Vessel (1074); Device Slipped (1584)

Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.

Event Description

It was reported that the silicone foley catheter fell out.When the patient arrived to the emergency department and shared the catheter, it was found that there was a slit in the balloon.

Manufacturer Narrative

The reported event was confirmed, however the cause was unknown.Visual inspection noted that one two-way silicone foley catheter was received.Visual evaluation of the sample noted that the balloon had burst and there was a tear in the balloon surface.No missing pieces were noted.Although the reported event was confirmed, the root cause could not be determined.A potential root cause for this failure mode could be due to tooling damaged (core pins).The product used for the treatment purposes.The product had failed to meet the specifications, and was influenced by the reported failure.The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use were found adequate and state the following: "sterile: unless package is opened or damaged.Warning: do not use ointments or lubricants having a petrolatum base.They will damage silicone and may cause balloon to burst.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Single use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip syringe.Do not use needle.Recommended inflation capacities 3cc balloon: use 5ml sterile water 5cc balloon: use 10ml sterile water 30cc balloon: use 35ml sterile water do not exceed recommended capacities.Warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Note: aggressive traction, particularly in the presence of suturing, is not recommended for 100% silicone foley catheters.To deflate catheter balloon: gently insert a syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.

Event Description

It was reported that the silicone foley catheter fell out.When the patient arrived to the emergency department and shared the catheter, it was found that there was a slit in the balloon.No missing pieces were reported.

• Brand Name: BARDEX ALL-SILICONE FOLEY CATHETER
• Type of Device: SILICONE FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 10485092
• MDR Text Key: 206488739
• Report Number: 1018233-2020-05664
• Device Sequence Number: 1
• Product Code: EZL
• UDI-Device Identifier: 00801741029752
• UDI-Public: (01)00801741029752
• Combination Product (y/n): N
• PMA/PMN Number: K040504
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: other,user facility
• Type of Report: Initial,Followup
• Report Date: 12/07/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/02/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 165816
• Device Catalogue Number: 165816
• Device Lot Number: NGEP3235
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 09/17/2020
• Date Manufacturer Received: 11/17/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1