MAUDE Adverse Event Report: MICROMAR INDUSTRIA E COMERCIO LTDA EASYDRILL PERFORATOR; DRILLS, BURRS, TREPHINES & ACCESSORIES (COMPOUND, POWERED)

Model Number DM0210FAA

Device Problem No Apparent Adverse Event (3189)

Patient Problem Perforation (2001)

Event Type  Injury  

Manufacturer Narrative

No conclusion can be drawn.No evaluation was performed, as the device was discarded.This dm0210faa easydrill cranial perforator with lot number 864/19 was manufactured by micromar.Multiple warnings are included in the easydrill cranial perforator ifu manual including: it is essential to keep the drill perpendicular (90°) at the predetermined point of the skull to be drilled, as an excessive deviation from perpendicularity may cause the product to fail and lead to serious patient injury.Select a drill bit suitable for the bone thickness.This prevents the drill from tearing the bone or brain tissue (similar effect when the bit is not positioned at90°).If the components of the easydrill cranial perforator become loose during trephination, discontinue use.The drill can cut or tear the dura mater when it unlocks.Check some conditions before performing the procedure, such as the existence of adhering dura mater or other anomalies adjacent to the drilling site.We will continue to track and trend this complaint type.If information is provided in the future, a supplemental report will be issued.

Event Description

It was reported that during a craniotomy procedure, a non-medtronic device was used but it was defective.It was replaced with an easydrill, however, the same issue occurred which resulted to dura damage.It was also added that there was a 15-minute delay in the procedure and was completed using a backup device.On follow-up it was reported that the 15-minute delay was due to the hemostasis procedure.It was also confirmed that the patient had no further issues post-surgery and the device was discarded by the customer.No further information can be provided regarding the event.

Event Description

On follow-up, it was confirmed that three non-medtronic devices were used and all were defective which resulted to dura damage.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: EASYDRILL PERFORATOR
• Type of Device: DRILLS, BURRS, TREPHINES & ACCESSORIES (COMPOUND, POWERED)
• Manufacturer (Section D): MICROMAR INDUSTRIA E COMERCIO LTDA; cnpj: 53.168.142/0001-29; av. marginal ao corrego da ser; sao paulo,sp 09980 -39; BR 09980-39
• MDR Report Key: 10606432
• MDR Text Key: 209167183
• Report Number: 1625507-2020-00168
• Device Sequence Number: 1
• Product Code: HBF
• Combination Product (y/n): N
• PMA/PMN Number: K141455
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: foreign,health professional
• Type of Report: Initial,Followup
• Report Date: 10/23/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/30/2020
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: No Information
• Device Model Number: DM0210FAA
• Device Catalogue Number: DM0210FAA
• Device Lot Number: 864/19
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 10/01/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1
• Treatment: ACRA-CUT, MERIDIAN, AND CODMAN (L/N: UNKNOWN); UNKNOWN NON-MEDTRONIC DEVICE; UNKNOWN NON-MEDTRONIC DEVICE
• Patient Outcome(s): Other