Product complaint #: (b)(4).The actual device has been returned and is currently pending evaluation.Once reliability engineering evaluates the device, a supplemental medwatch report will be sent accordingly.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Udi: (b)(4).
|
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary = > according to the information provided, it was reported by the sales rep via phone that before an anterior cruciate ligament reconstruction the large 23 mm sheath inserter was clogged.The complaint device was received and evaluated.Visual observations confirm that the sheath inserter was found blocked.In addition, the device presented light nicks and marks of wear in the handle.The complaint can be confirmed.The possible root cause for the reported failure can be occurred during cleaning/ sterilization procedures.However, this cannot be conclusive determined.A manufacturing record evaluation was performed for the finished device lot number:1807001, and no non-conformances were identified.At this point in time, no corrective action is required and no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.
|