COVIDIEN MEDITRACE RTS FOR ZOLL; PACEMAKER, CARDIAC, EXTERNAL TRANSCUTANEOUS (NON-INVASIVE)
|
Back to Search Results |
|
Model Number 20770 |
Device Problem
Material Separation (1562)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Type
malfunction
|
Manufacturer Narrative
|
The incident sample has been requested but to date has not been received for evaluation.If the sample is received, or if additional information pertinent to the incident is obtained a follow-up report will be submitted.As part of our manufacturing process, all device history records are reviewed and approved by quality, prior to release of product.
|
|
Event Description
|
The customer reported when they remove the defib patches, the adhesive stays behind on the patient's chest and the connection cables seem shorter than before.There was no harm to the patient.
|
|
Manufacturer Narrative
|
Additional information the device history record (dhr) was reviewed, and no abnormal process conditions were present during the manufacturing of the product that could have led to the reported condition.The dhr review shows that all acceptance criteria inspections were within acceptable limits during the production process.No samples have been received for evaluation.The investigation was performed using retains from the production lot.Visual inspection of the product showed no delamination of the gel when the liner was peeled off the gel.Electrical testing was also performed on the sample with no issues.Measurements of the wires was performed and they met raw material specifications.From a root cause analysis perspective, it should be noted that there are several important factors that can impact the adhesion of the product.The use of this product requires an adherence to proper skin preparation protocols as documented on the product packaging.Improper application of the electrode or applications without proper skin preparation can cause adhesion issues.Proper storage and usage of the electrodes is critical to the performance of the gel.The electrodes should be stored in their sealed, foil lined pouches away from extreme heat and humidity.The electrodes are single use and should not be used more than once.Failure to do so could result in adhesion issues where the electrode is not adequately adhered to the patient due to skin preparation.The results of the manufacturing facility investigation were unable to confirm any potential root causes associated with the manufacture of product which would have contributed to the reported condition.No further corrective or preventative actions are necessary currently.The manufacturing site will continue to trend this issue for future occurrences as part of the complaint review process.
|
|
Search Alerts/Recalls
|
|
|