MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX ALL-SILICONE FOLEY CATHETER

Model Number 902416

Device Problem Inflation Problem (1310)

Patient Problems No Consequences Or Impact To Patient (2199); Insufficient Information (4580)

Event Date 12/24/2020

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.

Event Description

It was reported that the patient was experiencing issues with inflating and deflating the balloon.Foley catheter balloon could not be inflated with typical syringe pressure.Balloon was not inflated, foley removed and new package opened.Second foley inserted and balloon inflated without difficulty.

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.H11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the device was not returned.

Event Description

It was reported that the patient experienced issues with inflating and deflating the balloon.The foley catheter balloon would not inflated with the typical syringe pressure.The balloon was unable to inflate, the foley catheter was removed and a new package was opened.The second foley was inserted and the balloon inflated without difficulty.

Manufacturer Narrative

The reported event was inconclusive.No sample was returned for evaluation.A potential root cause for this failure could be " lumen collapses under the pressure of the balloon / pinched lumen / kinked lumen." the device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use were found adequate and state the following: "sterile: unless package is opened or damaged.Warning: do not use ointments or lubricants having a petrolatum base.They will damage silicone and may cause balloon to burst.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Single use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip syringe.Do not use needle.Recommended inflation capacities 3cc balloon: use 5ml sterile water 5cc balloon: use 10ml sterile water 30cc balloon: use 35ml sterile water do not exceed recommended capacities.Warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Note: aggressive traction, particularly in the presence of suturing, is not recommended for 100% silicone foley catheters.To deflate catheter balloon: gently insert a syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the device was not returned.

Event Description

It was reported that the patient was experiencing issues with inflating and deflating the balloon.Foley catheter balloon could not be inflated with typical syringe pressure.The balloon was unable to inflate, the foley catheter was removed and a new package was opened.The second foley was inserted and the balloon inflated without difficulty.

• Brand Name: BARDEX ALL-SILICONE FOLEY CATHETER
• Type of Device: FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• MDR Report Key: 10751968
• MDR Text Key: 214803860
• Report Number: 1018233-2020-20530
• Device Sequence Number: 1
• Product Code: EZL
• UDI-Device Identifier: 00801741025068
• UDI-Public: (01)00801741025068
• Combination Product (y/n): N
• PMA/PMN Number: K040504
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: distributor,other
• Type of Report: Initial,Followup,Followup
• Report Date: 01/27/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/28/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Expiration Date: 12/31/2022
• Device Model Number: 902416
• Device Catalogue Number: 165816
• Device Lot Number: NGES0228
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 01/27/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1
• Patient Outcome(s): Other