MAUDE Adverse Event Report: COVIDIEN MFG DC BOULDER LIGASURE; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES

Model Number LF1837

Device Problem Energy Output Problem (1431)

Patient Problems No Information (3190); No Clinical Signs, Symptoms or Conditions (4582)

Event Date 10/27/2020

Event Type  malfunction  

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, during laparoscopic total gastrectomy, the device was not sealing vessels sufficiently.New device was opened.The issue also resulted to short delay in the procedure.

Event Description

According to the reporter, during laparoscopic total gastrectomy, the device was not sealing vessels sufficiently.New device was opened.The issue also resulted to less than 5 minutes delay in the procedure.There was no patient injury.

Manufacturer Narrative

Evaluation summary: medtronic conducted an investigation based upon all information received.Two samples were available for evaluation.The visual insp ection found no notable conditions.Functional testing noted that the device's jaw opening and closing mechanism was functioning properly.The weld integrity of the device were inspected and was found to be within specification.The knife cut of the devices were tested on a silicone test strip with acceptable results.The devices were activated multiple times on a saline soaked gauze pad with satisfactory results.All seal cycles were completed satisfactorily and end tones were heard indicating completed activation cycles.The devices were activated with the rotation knob in various positions to detect any problematic activation issues.No electrical or wiring issues were found.The device sealing performance was tested on porcine kidney tissue.The sealing was adequate when the seal cycle reached the end tone.It was reported that the ligasure produced only a partial seal of the vessel.The reported issue could not be confirmed.The most likely cause could not be established from the information available.The evaluation detected an unreported condition of an increased sensitivity of the jaw to produce regrasp alarms.The most likely cause for the additional condition was device design.Jaws measuring on the low end of specification, were more likely to generate alarm activations (regrasp alarms) during use.Internal process improvements have been initiated to mitigate this issue.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.A secondary review of the device history records found no potentially contributing factors.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: LIGASURE
• Type of Device: ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
• Manufacturer (Section D): COVIDIEN MFG DC BOULDER; 5920 longbow dr; boulder CO 80301 3299
• MDR Report Key: 10813084
• MDR Text Key: 215525480
• Report Number: 1717344-2020-01380
• Device Sequence Number: 1
• Product Code: GEI
• UDI-Device Identifier: 10884521705883
• UDI-Public: 10884521705883
• Combination Product (y/n): N
• PMA/PMN Number: K162941
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: foreign,user facility
• Type of Report: Initial,Followup
• Report Date: 12/30/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/09/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: LF1837
• Device Catalogue Number: LF1837
• Device Lot Number: 01220066X
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/09/2020
• Date Manufacturer Received: 12/04/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1