It was reported that during a medial collateral ligament repair, the anchor broke when screw in.The procedure was successfully completed without significant delay using a back-up device.No other complications were reported.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.
|
H10: internal complaint reference: (b)(4).H3, h6: the reported device was received for evaluation.It was determined the device contributed to the reported event.A complaint history review found similar reported events.A review of device records showed there were no indications to suggest that the product did not meet manufacturing specification upon release for distribution.The instructions for use was reviewed and found to include conditions of off label use and technique specifics, as well as precautions and warnings related to the use of the device.A risk management review found that the reported failure was documented appropriately, and there were no indications to suggest the anticipated risk is not adequate.A review of the anchor found that no burrs, cracks, or contamination is allowed.A certification of compliance to material and processing specifications is required.A review of the customer provided image found that the device has been deployed.The threads of the anchor are deformed and broken in several places.A visual inspection of the returned device found that is is not in its original packaging.The device has been deployed, and the threads of the anchor are deformed and broken off in several places.The proximal end of the anchor is fractured.There is debris on the anchor and on the shaft of the device.Based on the condition of the product material found during visual inspection, additional material testing is not required.Since no patient harm has been reported no further clinical investigation warranted.The complaint was confirmed, and the root cause was associated with unintended use of the device.Factors that could have contributed to the reported event include excessive force on the device, excessive torque on the device, attempted correction of a damaged device, off-axis insertion, improper preparation of the insertion site, or an inadvertent impact event inconsistent with normal use.Please refer to the instructions for use for recommendations on proper use of the device and potential troubleshooting methods to prevent future reoccurrence of the reported event.No containment or corrective actions are recommended at this time.
|