• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BOSTON SCIENTIFIC CORPORATION DIREXION FATHOM-16 SYSTEM; CATHETER, CONTINUOUS FLUSH

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BOSTON SCIENTIFIC CORPORATION DIREXION FATHOM-16 SYSTEM; CATHETER, CONTINUOUS FLUSH Back to Search Results
Model Number 84592
Device Problem Obstruction of Flow (2423)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Date 10/07/2020
Event Type  malfunction  
Manufacturer Narrative
Device analysis by mfr: the returned product consisted of a direxion microcatheter.The tip, inner/outer shaft, and hub/strain relief were microscopically and visually inspected.A test.018 wire was attempted to be advanced through the device, but was unable, therefore the device was soaked in the water bath for 5 days.When the device was removed from the bath, the test wire was attempted again and was unable to advance through the entire device.The wire advanced through the proximal end of the device stopping 3.2cm from the distal tip.The outer nitinol shaft is damaged and fractured starting 3.2cm from the distal tip.The inner polymer shaft has become damaged as well due to being used during a procedure and from the nitinol shaft damage.The tip is damaged.Inspection of the remainder of the device presented no other damage or irregularities.
 
Event Description
Reportable based on device analysis completed 08dec2020: it was reported there was an occlusion in the catheter.A direxion infusion catheter was selected for use.100 microns of oncozene microspheres were hand injected through the catheter.However, the microspheres clumped together and occluded the catheter 20cm from the catheter tip.A wire was used to help the occlusion but they could not inject more microspheres.However, the product investigation revealed a outer shaft fracture 3.2cm from the tip.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
DIREXION FATHOM-16 SYSTEM
Type of Device
CATHETER, CONTINUOUS FLUSH
Manufacturer (Section D)
BOSTON SCIENTIFIC CORPORATION
two scimed place
maple grove MN 55311
Manufacturer (Section G)
BOSTON SCIENTIFIC CORPORATION
model farm road
cork
EI  
Manufacturer Contact
jay johnson
two scimed place
maple grove, MN 55311
7634942574
MDR Report Key11005942
MDR Text Key221759688
Report Number2134265-2020-17424
Device Sequence Number1
Product Code KRA
UDI-Device Identifier08714729839637
UDI-Public08714729839637
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K142259
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Physician
Type of Report Initial
Report Date 12/14/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date07/03/2022
Device Model Number84592
Device Catalogue Number84592
Device Lot Number0025668632
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer11/05/2020
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 12/08/2020
Initial Date FDA Received12/14/2020
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured07/03/2020
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-