MAUDE Adverse Event Report: MEDTRONIC NAVIGATION, INC (LITTLETON) O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number BI70002000

Device Problems Noise, Audible (3273); Application Program Freezes, Becomes Nonfunctional (4031)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/14/2020

Event Type  malfunction  

Manufacturer Narrative

No patient information provided as no patient was involved in this concern.No parts have been received by the manufacturer for evaluation.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding an imaging system while being delivered.It was reported that the generator was continuously beeping and the beeping was permanent.It was reported that the issue occurred after turning on the imaging system and that the x-ray self-test could not be completed.Additionally, it was noted that the generator error logs displayed an e11 error.There was no patient present when this issue was identified.

Manufacturer Narrative

H3: a medtronic representative went to the site to test the equipment.Testing revealed that the x-ray generator would not complete self test on boot up.An error message was received indicating the generator capacitor banks.To restore functionality, the power tray for the imaging system was replaced.The imaging system then passed the system checkout and was found to be fully functional.Continuation of d11) pn: bi71000861, ln/sn: s/n: (b)(6).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

Manufacturer Narrative

Continuation of d11: section d information references the main component of the system.Other relevant device(s) are: product id: bi71000861, lot/serial #: 2052220007 h3) the power tray was returned to the manufacture for evaluation.After functional testing, performance testing and visual/physical examination the reported issue was confirmed.They verified that the returned fuses in the power tray tested good.It was installed into a known functional system.The system failed to boot.Generator would not ready, generator error log showed code e011.Faulty power tray assembly.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

D9/h2/h3/h6: part bi71000861 was returned however analysis has not been completed at this time.Codes b21, c21 and d16 reflect this.H2: correction - the lot number for part bi71000861 is rev.1 : s/n (b)(6).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Type of Device: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• MDR Report Key: 11027052
• MDR Text Key: 222070017
• Report Number: 3004785967-2020-01525
• Device Sequence Number: 1
• Product Code: OWB
• Combination Product (y/n): N
• PMA/PMN Number: K200074
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 03/12/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/17/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 02/03/2021
• Date Manufacturer Received: 02/26/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1