• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: AESCULAP, INC. MONOPOLAR CABLE W/LG PIN, 10 FEET; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

AESCULAP, INC. MONOPOLAR CABLE W/LG PIN, 10 FEET; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES Back to Search Results
Model Number US354
Device Problem Thermal Decomposition of Device (1071)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Date 11/23/2020
Event Type  malfunction  
Manufacturer Narrative
Manufacturing site evaluation: investigation on-going.Additional information / investigation results will be provided in a supplemental report.
 
Event Description
It was reported to aesculap that a monopolar cable (part # us354) was used during a hernia repair procedure performed on (b)(6) 2020.According to the complainant, the cable, where the plug of the bovie connected to the cord, completely burned up and separated.The device was returned to the manufacturer for evaluation.No patient complications or surgical delay occurred as a result of this event.Additional information has been requested, but has not yet been made available.
 
Manufacturer Narrative
Manufacturing site evaluation: the complaint device was returned to the manufacturer for evaluation.A visual examination revealed that the device was received with the bovie connector disconnected from the rest of the device.The bovie connector strain relief and insulation was removed adjacent to the thumb/finger grip section of the connector to observe the condition of the wire strands of either side of the break point.The strands, proximal to the connector, had a compressed appearance, rather than looking stretched and necked.Significant corrosion was observed on all the wire strands at the cable break point.The device history records (dhr) were not able to be reviewed as the lot number was not made available.However, all device history records (dhr) are reviewed and released according to documented procedures and a device is not released if it does not meet requirements or is nonconforming.The investigation into the reported event was able to confirm a failure of the device.However, based on the varied condition of the device, it is highly suggestive of the device having been used well past its designed service life, and possibly being subjected to less than careful handling and maintenance according to published end user guidance.There was no indication that the device issue occurred as a result of a defect in design, materials, or workmanship.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
MONOPOLAR CABLE W/LG PIN, 10 FEET
Type of Device
ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
Manufacturer (Section D)
AESCULAP, INC.
3773 corporate parkway
center valley PA 18034
Manufacturer (Section G)
AESCULAP, INC.
3773 corporate parkway
center valley PA 18034
Manufacturer Contact
jonathan severino
3773 corporate parkway
center valley, PA 18034
4847197287
MDR Report Key11059336
MDR Text Key223353674
Report Number2916714-2020-00719
Device Sequence Number1
Product Code GEI
UDI-Device Identifier04046964582820
UDI-Public4046964582820
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K913514
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional,Company Representative
Reporter Occupation Other Health Care Professional
Type of Report Initial,Followup
Report Date 02/25/2022
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberUS354
Device Catalogue NumberUS354
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer11/29/2021
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 11/23/2020
Initial Date FDA Received12/22/2020
Supplement Dates Manufacturer Received01/28/2022
Supplement Dates FDA Received02/25/2022
Was Device Evaluated by Manufacturer? Yes
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Patient Sequence Number1
-
-