The user facility reported to terumo cardiovascular that during vein harvesting procedure, charred and burnt mark was seen over the tip of the dissector.As per the clinical specialist, looking at the video, the operator is applying excessive force to the cutter tip.This would presumably delaminate the juncture between the cutter head and the main body of the cutter assembly.This operator needs to review the proper grounding technique in order to minimize the force applied in this video.Product was changed out.Procedure completed successfully.
|
This follow-up report is submitted to fda in accord with applicable regulations ¿ and as indicated by terumo cardiovascular systems in the initial report submitted to the fda on december 23, 2020.Upon further investigation of the reported event, the following information is new and/or changed: identification of evaluation 3039, 4614, 4582, 1071, 10, 11, 3331, 120, 19.Component code: 3039 - cautery tip, health effect - impact code: 4614 - serious injury/ illness/ impairment, health effect - clinical code: 4582 - no clinical signs, symptoms or conditions, medical device problem code: 1071 - thermal decomposition of device, type of investigation #1: 10 - testing of actual/suspected device, type of investigation #2: 11 - testing of device from same lot/batch retained by manufacturer, type of investigation #3: 3331 - analysis of production records, investigation findings: 120 - electrical problem identified, investigation conclusions: 19 - cause traced to user.The affected sample was inspected upon receipt and confirmed to have burn marks and a hole in the v-cutter.A representative retention sample was reviewed and electrically tested with no anomalies and all electrical tests within specification.The v-cutter on the retention sample was fully intact.During the manufacturing process, all vsp550 are visually inspected and tested for functionality and performance along with inspection for v-cutter mechanism, prior to packaging.All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.
|