|
Model Number 72204046 |
Device Problem
Break (1069)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/11/2021 |
Event Type
Injury
|
Manufacturer Narrative
|
(b)(4).
|
|
Event Description
|
It was reported that, during a knee procedure and when attempting to flip the trunav drill, the small rod that opens the reamer broke and it was impossible to retrograde ream.The procedure was completed with a backup device and no significant delay or further complications reported.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.
|
|
Manufacturer Narrative
|
The reported device, used in treatment, was received for evaluation.There was a relationship found between the returned device and the reported incident.A visual inspection revealed that the device was returned without its complementary components.The internal wire appeared to be disengaged from the grey slider.There was minor wear on the metal from use.A functional evaluation concluded that the grey slider was no longer connected to the rotating cutter and was unable to change its orientation.A review of the device records showed there were no indications to suggest that the product did not meet manufacturing specification or would not be able to perform as intended.A complaint history review concluded this was an isolated event.A review of risk management files found that the reported failure was documented appropriately.A review of the instructions for use found the following warnings and precautions related to the reported failure: ¿ the cannulated power drill must always be set to forward when drilling tunnels and retrograde-drilling sockets.¿ prior to deploying the cutting blade, ensure that the guide wire is retracted within the groove approximately 1.5 inches (38 mm) within the retrograde drill shaft and is not in the drill head window.The groove in the guide wire provides tactile feedback that it is retracted to the proper position.This will prevent possible device failure.The complaint was confirmed.Factors that could have contributed to the reported event include drilling with an exposed guide wire, excessive force during use, or use of the reverse function when drilling.
|
|
Manufacturer Narrative
|
D3 corrected: manufacturing name, city and address.This report was inadvertently submitted under manufacturer report number ¿(b)(4)correct manufacturer report number is ¿(b)(4).
|
|
Search Alerts/Recalls
|
|
|